New Arrivals

Latest and greatest - everything that has been recently added to our offering!
    New
    TDC thumbscrew cover installed on an SSG11 with the numbered dial sticker visible
    Angled view of the SSG11 TDC cover showing plus and minus markings and hex mounting screws
    Side profile of the SSG11 outer barrel with the low-profile TDC thumbscrew shield installed
    SSG11 TDC cover housing next to the numbered hop up adjustment wheel with dial markings
    TDC cover kit contents for SSG11: shield housing, hard plastic bushing and numbered dial sticker
    TDC Thumbscrew Shield / Cover for SSG11
    TRIDOS.DESIGN
    €25.00 EUR
    New
    CNC machined concave shape nub made for SSG11
    Front view of the red concave SSG11 nub showing the threaded bore for the original screw
    Red aluminum concave nub mounted on the SSG11 hop up TDC adjustment wheel
    Concave nub seated inside the SSG11 hop chamber viewed through the TDC opening
    Concave Nub for SSG11 Hop Chamber
    TRIDOS.DESIGN
    €10.00 EUR
    New
    Cytac low ride belt loop holster mount with elastic leg strap and quick-release buckle
    A tactical templars gear belt with a black cytac drop-leg holster platform and black webbing strap, shown on a white background.
    cytac drop-leg holster platform mounted on templars gear belt alongside Novritsch universal open holster that can be mounted using a single screw.
    cytac drop leg / low ride belt loop platform for airsoft holsters mounted on player's hip and strapped over the leg using stretchable strap.
    close-up of a mounted cytac drop-leg low ride belt loop holster platform on players hip. mounted to the platform is a Novritsch universal open holster with SSP28 airsoft replica holstered.
    all the parts that come included with cytac drop leg platform for airsoft players. comes with quick release mechanism, amomax style mount wheel and necessary screws and strap to use the holster platform.
    Low Ride Belt Loop / Dropleg Holster Mount
    CYTAC
    €25.00 EUR
    StatTrak kill counter wired to the Germany PEQ box battery source, display reading 00003
    Rear of the StatTrak hit counter with its power cable and angled trigger port connector
    StatTrak kill counter mounted under the M-LOK handguard of an AR15 airsoft replica with PEQ box on top
    Side view of the StatTrak counter on an SSR4 handguard, powered by the PEQ box on the top rail
    PEQ box battery compartment open with a Nitecore RCR123A 16340 rechargeable battery
    M-LOK and Picatinny Rail mount adapters for StatTrak
    StatTrak kill counter showing 01337 on an airsoft rifle rail next to a red dot optic
    Underside of the StatTrak counter showing its two knurled control buttons and mounting screws
    StatTrak™ Hit Counter /Germany PEQ Box Bundle/
    TRIDOS.DESIGN
    €149.00 EUR
    New
    Six CNC stainless steel AAP01 hammer assembly parts arranged around the blue install jig
    AAP-01 Stainless Steel Complete Hammer Set
    TRIDOS.DESIGN
    €39.00 EUR
    Two spare 30mm titanium mesh protector discs with countersunk M2 screw holes for thermal devices
    Spare 30mm Titanium Mesh Protector for Thermal Device (Set of 2)
    TRIDOS.DESIGN
    €16.00 EUR
    Top mount with picatinny rail fitted around a thermal monocular protector, monocular greyed out
    Vector Optics red dot mounted on top of a Guide thermal monocular on an SSR-4 airsoft rifle
    Close-up of a red dot sight on the top mount rail above the thermal monocular objective
    Curved aluminum clamp bracket and picatinny rail plate included with the top mount
    Top mount kit contents: CNC aluminum clamp, picatinny rail section and six mounting screws
    Top Mount Rail for OwlSet / Guide 1.2x10 Thermal Monocular
    TRIDOS.DESIGN
    €25.00 EUR
    New
    Titanium mesh protector and flip cap installed on a 1.2x10 thermal monocular above the mount base
    OwlSet thermal monocular with protector and mount base, T1 style rail mount shown as not included
    Guide 1.2x10 thermal monocular mounted on the picatinny rail of a Novritsch SSR-4 airsoft rifle
    Kit contents: titanium mesh protector with flip cap, mount base, clamp ring and mounting screws
    Titanium Protector and Mount for OwlSet / Guide 1.2x10 Thermal Monocular
    TRIDOS.DESIGN
    €49.00 EUR
    New
    Two titanium mesh protector discs with mounting ring and orange install tool for Hikmicro Thunder 2.0
    Titanium mesh protector installed on the objective lens of a Hikmicro Thunder 2.0 thermal scope
    Full view of a Hikmicro Thunder 2.0 thermal scope fitted with the BB-proof titanium mesh protector
    Titanium Mesh Protector for Hikmicro Thunder 2.0 Thermal
    TRIDOS.DESIGN
    €39.00 EUR
    New
    StatTrak kill counter display showing 00003, wired to the black PEQ box power source
    Back of the PEQ box showing the cable and right-angle plug that powers the StatTrak counter
    Hand holding an airsoft replica with the PEQ box light on and the StatTrak counter mounted below
    StatTrak hit counter on the M-LOK handguard of an SSR4 airsoft rifle, below the PEQ box
    PEQ box with its cap unscrewed and an RCR123 battery next to the threaded compartment
    M-LOK and Picatinny Rail mount adapters for StatTrak
    Side view of the StatTrak kill counter reading 01337 on an airsoft AR-15 style receiver rail
    Underside of the StatTrak kill counter showing its two round textured control buttons
    StatTrak™ Hit Counter /PEQ Box Bundle/
    TRIDOS.DESIGN
    €149.00 EUR
    New
    Four CNC stainless steel AAP-01 hammer assembly parts: sear, valve knocker, rotor and auto sear
    AAP-01 Stainless Steel Extra Hammer Bits / Upgrade Set
    TRIDOS.DESIGN
    €20.00 EUR
    New
    CNC machined auto sear for Action Army AAP-01 hammer assembly made from stainless steel
    Close-up of the stainless steel AAP-01 auto sear, part 57, from the pivot ring side
    AAP-01 Stainless Steel Auto Sear / Part 57
    TRIDOS.DESIGN
    €9.00 EUR
    New
    CNC machined rotor for Action Army AAP-01 hammer assembly made from stainless steel
    Stainless steel rotor for the AAP01 hammer assembly, part 54, with its round pin facing up
    Angled close-up of the CNC machined AAP-01 rotor, part 54, with the pin toward the camera
    AAP-01 Stainless Steel Rotor / Part 54
    TRIDOS.DESIGN
    €7.00 EUR
    New
    CNC machined main sear for Action Army AAP-01 hammer assembly made from stainless steel
    Stainless steel AAP-01 main sear, part 51, viewed from the pivot hole side
    AAP-01 Stainless Steel Sear / Part 51
    TRIDOS.DESIGN
    €9.00 EUR
    New
    CNC machined valve knocker for Action Army AAP-01 hammer assembly made from stainless steel
    Rear angle of the stainless steel AAP-01 valve knocker, part 53, showing the knocker hook
    AAP-01 Stainless Steel Valve Knocker / Part 53
    TRIDOS.DESIGN
    €9.00 EUR
    Sold Out
    Set of three A1, A2 and A3 safety dust covers for SSG10 stocks with the mounting screw
    SSG10 bolt action receiver with a Flux trigger installed, showing the trigger area
    Safety Dust Cover for Flux Trigger (Set of 3)
    TRIDOS.DESIGN
    €9.00 EUR
    New
    Flamingo AEG bucking fitted over the hop-up window end of a stainless steel inner barrel
    Pink Flamingo bucking for AEG standing upright, showing its large flat contact patch
    Front view of the Flamingo AEG bucking showing the feed lips and inner bore
    Flamingo Bucking for AEG
    Sniper Mechanic
    €12.00 EUR
    New
    VSR10 / SSG10 trigger box for Bolt E HPA engine.
    Bolt E trigger box for out-of-box installation on VSR10 / SSG10 platforms.
    Gold ceracoted Bolt-E trigger box for VSR10 / SSG10 with the two included mounting screws
    Bolt-E HPA Engine Trigger Box for VSR10 / SSG10
    AMP
    €69.00 EUR
    New
    Poor Man's StatTrak rubber patch with red 001337 digits styled like the Counter-Strike kill counter
    Angled side view of the StatTrak kill counter patch showing its layered rubber relief
    "Poor Man's StatTrak" Patch
    TRIDOS.DESIGN
    €7.00 EUR
    New
    real life stattrak kill counter for airsoft showing the user interface and settings menu
    Real life StatTrak airsoft hit counter, DIY Edition back view with wiring for AEG battery connection
    StatTrak airsoft hit counter on M-LOK handguard showing 01337 kill count display
    Real life StatTrak kill counter on the Picatinny rail of an M4 airsoft rifle with red dot sight
    Close-up of the StatTrak hit counter Picatinny rail mount, Counter-Strike replica display
    Close-up of the control buttons on the StatTrak airsoft hit counter and its Picatinny rail mount
    M-LOK and Picatinny Rail mount adapters for StatTrak
    IRL StatTrak digital counter with 2 mounting options, 2 different wiring harnesses and heathshrink for connecting bare wires.
    Real life replica of StatTrak DIY edition hit counter from Counter Strike game.
    StatTrak™ Hit Counter /DIY Edition/
    TRIDOS.DESIGN
    €99.00 EUR
    B-Stock
    AAP-01 steel hammer and firing pin lock, CNC machined stainless steel, with blue installation jig
    Installing the AAP-01 stainless steel hammer into the trigger box using the included installation jig
    CNC steel hammer installed in an AAP-01 airsoft GBB pistol, replacement for a broken stock hammer
    Stainless steel hammer and firing pin lock installed in an AAP-01C trigger assembly, close-up
    AAP-01 hammer assembly with stainless steel hammer set installed, top view of the trigger unit
    Stainless steel hammer resting inside the AAP01 trigger box, viewed from the rear of the frame
    AAP-01 Stainless Steel Hammer and Firing Pin Lock (B-Stock)
    TRIDOS.DESIGN
    €25.00 EUR €15.00 EUR
    New
    Protective cover for SSG11 magazine release / eject button
    Protective cover for SSG11 magazine release / eject button installed on the SSG11 replica
    Side profile view of the SSG11 mag release protective cover installed on the replica
    SSG11 Mag Release Protector
    TRIDOS.DESIGN
    €10.00 EUR
    New
    EMG odin m12 sidewinder speedloader on white background#color_black
    EMG ODIN M12 sidewinder speedloader filling an airsoft PTS EPM1S magazine#color_black
    ODIN M12 fill port with silicone flaps visible for noise dampening#color_black
    EMG ODIN M12 sidewinder speedloader with silicone insert / sound dampener installed#color_black
    BB retention nozzle preventing BB's from falling out for EMG ODIN M12 speedloader#color_black
    EMG odin m12 sidewinder speedloader on white background#color_red
    EMG ODIN M12 sidewinder speedloader filling an airsoft PTS EPM1S magazine#color_red
    EMG ODIN M12 fill port with silicone flaps visible for noise dampening#color_red
    EMG ODIN M12 sidewinder speedloader with silicone insert / sound dampener installed#color_red
    BB retention nozzle preventing BB's from falling out for EMG ODIN M12 speedloader#color_red
    EMG Odin M12 Sidewinder Speedloader
    EMG
    €49.00 EUR
    New
    Vector Optics Maverick 1x22 Gen2 red dot sight with QD riser mount, front-left view
    Maverick Gen2 red dot mounted on an M4 airsoft AEG rifle via the QD picatinny mount
    Close-up of the Maverick Gen2 numbered brightness dial, capped turrets and coated lens
    Maverick 1x22 Gen2 with UP elevation turret, brightness ring and QD lever mount visible
    Sharp 3 MOA aiming dot visible through the lens of the Maverick 1x22 Gen2 red dot sight
    Open CR2032 battery compartment on the Maverick Gen2 red dot with its coin-slot cap removed
    Maverick Gen2 red dot with included low-profile mount and hex tool for airsoft setups
    VectorOptics Maverick 1x22 Red Dot Gen2
    Vector Optics
    €65.00 EUR