SHIPPING WORLDWIDE FROM EU

SSG96 Upgrades

Everything we make for the Novritsch SSG96, in both MK1 and MK2.

Sort

TDC 2.0 PRO adjustment dial mounted on the SSG96 twisted outer barrel below the scope

TDC 2.0 thumbscrew dial beside the etched HOP marking on the SSG96 outer barrel

Adjusting the TDC 2.0 Basic hop-up screw through the barrel port with an allen key

TDC threaded insert fitted to the stock SSG96 hop-up chamber on the brass inner barrel

Exploded view of the TDC 2.0 pressure bar, threaded plate and vertical hop-up nub

The three included CNC machined nubs in black, ridged grey and silver aluminum

Included drill jig clamped on the SSG96 barrel with a drill ready for the TDC hole

Contents of the TDC 2.0 Basic and PRO sets: jig, drill bit, thumbscrew, nubs, 3M tape

TDC 2.0 for SSG96 Stock Chamber

from €27.00 EUR

Black SSG24 mag unloader tool with spring-loaded release button and side magazine slot

Mag unloader screwed onto a Novritsch 0.43g BIO ammo bottle, ready to empty SSG24 magazines

Hand holding the ammo bottle while the unloader tool empties a translucent SSG24 magazine

SSG24 / SSG96 Mag Unloader

TRIDOS speedloader adapter fitted over the feed lips of a translucent SSG24 magazine

Adapter joining a speedloader to an SSG24 magazine so BBs feed straight into the mag

BB-filled speedloader with the adapter beside an SSG96 magazine holding back a retained BB

Black SSG96 speedloader adapter shown alone with its fixing screw and bb retention o-ring

SSG24 / SSG96 Speedloader Adapter

Sold Out

SSG96 steel hop up arm installed flush in the hop-up chamber above the brass barrel

Hop-up chamber with the stainless arm raised, showing the red fine-pitch adjustment screw

Stainless steel hop up arm with retention screw and red swiveling CNC nub for the SSG96

SSG96 upgrade parts laid out: stainless arm, black set screw and red CNC contact nub

SSG96 Steel Hop Up Arm Upgrade

Semi-translucent Action Army 40rd L96 magazine for the SSG96, angled view showing the BB follower

Action Army 40rd magazine seated in a Novritsch SSG96, BBs visible through the stock window

Action Army Type 96 magazine next to its retail box marked 40 rounds, for L96 platform rifles

SSG96 / L96 Action Army 40rd Magazine

Close-up of the Action Army mag catch installed in the magazine well of an SSG96

AAC-marked Action Army mag catch fitted to an SSG96, bolt handle visible in the background

Looking into the open SSG96 magazine well with the Action Army magazine catch in place

Standalone Action Army mag catch showing the latch face, spring bar and curved seat

SSG96 / L96 Action Army Mag Catch

SSG96 front stud holder keeping the metal stud in place on the outer barrel

Front stud held upright by the black holder on an SSG96 outer barrel during assembly

Black 3D-printed front stud holder for the SSG96 shown on its own against white

SSG96 Front Stud Holder

Save €2.00 EUR

Pair of black 7075 aluminum SSG96 cheekrest thumbscrews with diamond knurled heads

View from the SSG96 buttpad along the stock with both cheekrest screws on the side

Fingers turning a knurled thumbscrew on the SSG96 stock for a tool-less spring change

Allen key seated in the hex socket of an SSG96 cheekrest thumbscrew for extra torque

SSG96 Cheekrest Thumbscrews

~~€10.00 EUR~~ €8.00 EUR

Numbered pin face of the wrench next to a stainless sniper cylinder and its nozzle

Hand gripping the knurled wrench to unscrew a stainless airsoft cylinder head

Wrench face with width settings 1 to 6 and two steel pins installed at position 3

Side of the wrench body showing the leverage hole for a hex key or screwdriver

Universal Cylinder Nozzle Wrench

Sold Out

SSG96 airbrake pin protruding from the CNC modified piston head on the blue piston

Front view down the SSG96 airbrake piston assembly with the aluminum pin centered

Modified piston head removed from the blue SSG96 piston, showing the airbrake pin seat

Single aluminum airbrake pin standing next to the black Modify piston head for the SSG96

Airbrake kit contents: CNC piston head and five aluminum pins from 10 to 24 mm for the SSG96

Airbrake Kit for SSG96

Front of the SSG96 stock under its fluted barrel with a QD socket fitted in the washer recess

Magpul QD sling clipped into an attachment point at the rear of the SSG96 buttstock

Close-up of a QD swivel locked into the aluminum mount on top of the rifle stock

Set of four CNC machined aluminum QD attachment points, two threaded and two through-hole

SSG96 QD Attachment Points (set of 4)

inner barrel stabilizer for novritsch supressor#size_34-37mm

inner barrel stabilizer for novritsch supressor#size_34-37mm

inner barrel stabilizer for novritsch supressor#size_34-37mm

inner barrel stabilizer for novritsch supressor#size_34-37mm

inner barrel stabilizer for novritsch supressor#size_34-37mm

inner barrel stabilizer for novritsch supressor#size_29-33mm

inner barrel stabilizer for novritsch supressor#size_29-33mm

inner barrel stabilizer for novritsch supressor#size_29-33mm

inner barrel stabilizer for novritsch supressor#size_29-33mm

inner barrel stabilizer for novritsch supressor#size_29-33mm

Inner Barrel Stabilizer (Suppressor / Outer Barrel)

Victoptics S6 1-6x24 scope in a cantilever mount on a Novritsch SSR-15, side view

Front quarter of the S6 LVPO showing the locking turrets and click adjustment ring

Back objective lens of the Victoptics scope with throw lever fitted, mounted on a rifle

Actual view through the scope showing the illuminated green horseshoe reticle and mil tree

Package contents: S6 1-6x24 scope, two mount rings, flip-up lens covers, cloth and allen key

Victoptics S6 1-6x24 Variable Scope

Vector Optics offset bubble level with green vial and allen key for picatinny mounting

Shooter's view of the offset bubble level indicator mounted beside an LVPO on a rifle rail

Close-up of the green bubble vial offset to the rail's side under a Victoptics scope

Offset Bubble Level Indicator

New

The Guide TE211M in the bundle, showing a white-hot figure in its viewfinder

Objective lens of the Guide TE211M thermal monocular, cap removed and wrist lanyard fitted

Guide TE211M thermal monocular with the lens cap on and the model marking on its housing

Underside of the Guide TE211M thermal monocular showing its tripod thread and mounting holes

USB-C charging port of the Guide TE211M thermal monocular under its weather-sealed flap

Guide Thermal Monocular TE211M (Unlocked)

New

TE211M thermal with the titanium protector fitted and a picatinny top rail for a red dot

Vector Optics red dot mounted on top of a Guide thermal monocular on an SSR-4 airsoft rifle

The Guide TE211M in the bundle, showing a white-hot figure in its viewfinder

OwlSet thermal monocular with protector and mount base, T1 style rail mount shown as not included

Kit contents: titanium mesh protector with flip cap, mount base, clamp ring and mounting screws

Top mount kit contents: CNC aluminum clamp, picatinny rail section and six mounting screws

Guide TE211M Thermal + Protector Bundle

~~€527.00 EUR~~ €495.00 EUR

SSG96 Upgrades & Parts — MK1 and MK2