🔥 New Arrivals

Latest and greatest - everything that has been recently added to our offering!

    38 products

    New
    Red Perfect Airsoft concave bucking fitted on an SSG11 inner barrel
    Red silicone SSG11 bucking standing upright with the extra outer sealing rib on top
    View into the red SSG11 bucking showing the concave contact patch and alignment ribs
    Perfect Airsoft Concave Bucking for SSG11
    Perfect Airsoft
    €12.00
    New
    Angled view of the low profile Weaver mount showing its rail clamp and locking screws.
    Weaver mount shown with its two locking screws and included hex wrench tool.
    Illustration of the mount raising a magnifier scope above a rifle's Picatinny rail.
    Low Profile T1 / RUM Mount for Picatinny Rail
    Vector Optics
    €9.00
    New
    The Guide TE210MS in the bundle, showing a white-hot figure in its viewfinder
    Objective lens of the Guide TE210MS thermal monocular, cap removed and wrist lanyard fitted
    Guide TE210MS thermal monocular with the lens cap on and the model marking on its housing
    Underside of the Guide TE210MS thermal monocular showing its tripod thread and mounting holes
    USB-C charging port of the Guide TE210MS thermal monocular under its weather-sealed flap
    Guide TE210MS thermal monocular, side view with the lanyard
    Magnetic molle carrying case of the Guide TE210MS thermal monocular, closed
    Guide TE210MS thermal monocular inside its open magnetic molle carrying case
    Guide Thermal Monocular TE210MS (Unlocked)
    Guide
    €479.00
    New
    Reticle and Zeroing Menu screen showing status off with a Turn Reticle On button in the unlock tool interface for Guide thermal monocular.
    Three step window showing Wi-Fi connection to the monocular and the final one press screen to turn the reticle menu on for Guide thermal monoculars.
    Confirmation dialog and restore screen letting the user apply or undo the reticle change and restore the original backup for Guide thermal monocular.
    Guide thermal monocular display showing the reticle and zeroing menu with a red dot reticle centered on screen on TE210MS Guide monocular.
    Monocular screen showing the reticle style menu with Dot and Cross options, Cross selected and displayed in green on TE211M Guide monocular.
    Monocular screen showing the zeroing settings menu with X and Y coordinate values and a Confirm option on TE211M Guide monocular.
    Guide Monocular Reticle Unlock Tool License
    TRIDOS.DESIGN
    €19.00
    New
    One-piece 30mm scope mount with dual rings and cantilever body, shown with included hex key.
    Close-up of a 30mm ring showing the X-ACCU marking and its 18-22 in/lbs torque spec
    LPVO scope attached via the high one-piece mount to a picatinny rail on a compact airsoft pistol.
    The mount holding a Victoptics scope clear above an SSX23 Nano Carbine rail
    1.96" / 50mm High One-Piece Scope Mount
    Vector Optics
    €28.00
    New
    The mount kit highlighted in black, carrying a mini red dot above a scope on an airsoft build
    Mini red dot mounted above a scope with the VAS kit on a Nano Carbine build
    Kit contents: ring clamp, picatinny rail, two footprint plates, screws and two hex keys
    VAS™ Accessory Mount Kit for 30mm Scope Mount
    Vector Optics
    €22.00
    New
    TE211M thermal with the titanium protector fitted and a picatinny top rail for a red dot
    Vector Optics red dot mounted on top of a Guide thermal monocular on an SSR-4 airsoft rifle
    The Guide TE210MS in the bundle, showing a white-hot figure in its viewfinder
    OwlSet thermal monocular with protector and mount base, T1 style rail mount shown as not included
    Kit contents: titanium mesh protector with flip cap, mount base, clamp ring and mounting screws
    Top mount kit contents: CNC aluminum clamp, picatinny rail section and six mounting screws
    Guide TE210MS Thermal + Protector Bundle
    TRIDOS.DESIGN
    €547.00 €498.00
    New
    Titanium mesh protector and flip cap installed on a 1.2x10 thermal monocular above the mount base
    OwlSet thermal monocular with protector and mount base, T1 style rail mount shown as not included
    Guide 1.2x10 thermal monocular mounted on the picatinny rail of a Novritsch SSR-4 airsoft rifle
    Kit contents: titanium mesh protector with flip cap, mount base, clamp ring and mounting screws
    Titanium Protector and Mount for OwlSet / Guide 1.2x10 Thermal Monocular
    TRIDOS.DESIGN
    €49.00
    New
    TDC thumbscrew cover installed on an SSG11 with the numbered dial sticker visible
    Angled view of the SSG11 TDC cover showing plus and minus markings and hex mounting screws
    Side profile of the SSG11 outer barrel with the low-profile TDC thumbscrew shield installed
    SSG11 TDC cover housing next to the numbered hop up adjustment wheel with dial markings
    TDC cover kit contents for SSG11: shield housing, hard plastic bushing and numbered dial sticker
    TDC Thumbscrew Shield / Cover for SSG11
    Perfect Airsoft
    €25.00
    New
    CNC machined concave shape nub made for SSG11
    Front view of the red concave SSG11 nub showing the threaded bore for the original screw
    Red aluminum concave nub mounted on the SSG11 hop up TDC adjustment wheel
    Concave nub seated inside the SSG11 hop chamber viewed through the TDC opening
    Concave Nub for SSG11 Hop Chamber
    Perfect Airsoft
    €10.00
    New
    Two titanium mesh protector discs with mounting ring and orange install tool for Hikmicro Thunder 2.0
    Titanium mesh protector installed on the objective lens of a Hikmicro Thunder 2.0 thermal scope
    Full view of a Hikmicro Thunder 2.0 thermal scope fitted with the BB-proof titanium mesh protector
    Titanium Mesh Protector for Hikmicro TE19 2.0 Thermal
    TRIDOS.DESIGN
    €39.00
    New
    Cytac low ride belt loop holster mount with elastic leg strap and quick-release buckle
    A tactical templars gear belt with a black cytac drop-leg holster platform and black webbing strap, shown on a white background.
    cytac drop-leg holster platform mounted on templars gear belt alongside Novritsch universal open holster that can be mounted using a single screw.
    cytac drop leg / low ride belt loop platform for airsoft holsters mounted on player's hip and strapped over the leg using stretchable strap.
    close-up of a mounted cytac drop-leg low ride belt loop holster platform on players hip. mounted to the platform is a Novritsch universal open holster with SSP28 airsoft replica holstered.
    all the parts that come included with cytac drop leg platform for airsoft players. comes with quick release mechanism, amomax style mount wheel and necessary screws and strap to use the holster platform.
    Low Ride Belt Loop / Dropleg Holster Mount
    CYTAC
    €25.00
    New
    StatTrak kill counter display showing 00003, wired to the black PEQ box power source
    Back of the PEQ box showing the cable and right-angle plug that powers the StatTrak counter
    Hand holding an airsoft replica with the PEQ box light on and the StatTrak counter mounted below
    StatTrak hit counter on the M-LOK handguard of an SSR4 airsoft rifle, below the PEQ box
    PEQ box with its cap unscrewed and an RCR123 battery next to the threaded compartment
    M-LOK and Picatinny Rail mount adapters for StatTrak
    Side view of the StatTrak kill counter reading 01337 on an airsoft AR-15 style receiver rail
    Underside of the StatTrak kill counter showing its two round textured control buttons
    StatTrak™ Hit Counter /PEQ Box Bundle/
    TRIDOS.DESIGN
    €149.00
    New
    real life stattrak kill counter for airsoft showing the user interface and settings menu
    Real life StatTrak airsoft hit counter, DIY Edition back view with wiring for AEG battery connection
    StatTrak airsoft hit counter on M-LOK handguard showing 01337 kill count display
    Real life StatTrak kill counter on the Picatinny rail of an M4 airsoft rifle with red dot sight
    Close-up of the StatTrak hit counter Picatinny rail mount, Counter-Strike replica display
    Close-up of the control buttons on the StatTrak airsoft hit counter and its Picatinny rail mount
    M-LOK and Picatinny Rail mount adapters for StatTrak
    IRL StatTrak digital counter with 2 mounting options, 2 different wiring harnesses and heathshrink for connecting bare wires.
    Real life replica of StatTrak DIY edition hit counter from Counter Strike game.
    StatTrak™ Hit Counter /DIY Edition/
    TRIDOS.DESIGN
    €99.00
    New
    Six CNC stainless steel AAP01 hammer assembly parts arranged around the blue install jig
    AAP-01 Stainless Steel Complete Hammer Set
    TRIDOS.DESIGN
    €39.00
    New
    Four CNC stainless steel AAP-01 hammer assembly parts: sear, valve knocker, rotor and auto sear
    AAP-01 Stainless Steel Extra Hammer Bits / Upgrade Set
    TRIDOS.DESIGN
    €25.00
    New
    CNC machined auto sear for Action Army AAP-01 hammer assembly made from stainless steel
    Close-up of the stainless steel AAP-01 auto sear, part 57, from the pivot ring side
    AAP-01 Stainless Steel Auto Sear / Part 57
    TRIDOS.DESIGN
    €9.00
    New
    CNC machined rotor for Action Army AAP-01 hammer assembly made from stainless steel
    Stainless steel rotor for the AAP01 hammer assembly, part 54, with its round pin facing up
    Angled close-up of the CNC machined AAP-01 rotor, part 54, with the pin toward the camera
    AAP-01 Stainless Steel Rotor / Part 54
    TRIDOS.DESIGN
    €7.00
    New
    CNC machined main sear for Action Army AAP-01 hammer assembly made from stainless steel
    Stainless steel AAP-01 main sear, part 51, viewed from the pivot hole side
    AAP-01 Stainless Steel Sear / Part 51
    TRIDOS.DESIGN
    €9.00
    New
    CNC machined valve knocker for Action Army AAP-01 hammer assembly made from stainless steel
    Rear angle of the stainless steel AAP-01 valve knocker, part 53, showing the knocker hook
    AAP-01 Stainless Steel Valve Knocker / Part 53
    TRIDOS.DESIGN
    €9.00
    New
    EMG odin m12 sidewinder speedloader on white background#color_black
    EMG ODIN M12 sidewinder speedloader filling an airsoft PTS EPM1S magazine#color_black
    ODIN M12 fill port with silicone flaps visible for noise dampening#color_black
    EMG ODIN M12 sidewinder speedloader with silicone insert / sound dampener installed#color_black
    BB retention nozzle preventing BB's from falling out for EMG ODIN M12 speedloader#color_black
    EMG odin m12 sidewinder speedloader on white background#color_red
    EMG ODIN M12 sidewinder speedloader filling an airsoft PTS EPM1S magazine#color_red
    EMG ODIN M12 fill port with silicone flaps visible for noise dampening#color_red
    EMG ODIN M12 sidewinder speedloader with silicone insert / sound dampener installed#color_red
    BB retention nozzle preventing BB's from falling out for EMG ODIN M12 speedloader#color_red
    EMG Odin M12 Sidewinder Speedloader
    EMG
    €49.00
    New
    Poor Man's StatTrak rubber patch with red 001337 digits styled like the Counter-Strike kill counter
    Angled side view of the StatTrak kill counter patch showing its layered rubber relief
    "Poor Man's StatTrak" Patch
    TRIDOS.DESIGN
    €7.00
    New
    Flamingo AEG bucking fitted over the hop-up window end of a stainless steel inner barrel
    Pink Flamingo bucking for AEG standing upright, showing its large flat contact patch
    Front view of the Flamingo AEG bucking showing the feed lips and inner bore
    Flamingo Bucking for AEG
    Sniper Mechanic
    €12.00
    New
    VSR10 / SSG10 trigger box for Bolt E HPA engine.
    Bolt E trigger box for out-of-box installation on VSR10 / SSG10 platforms.
    Gold ceracoted Bolt-E trigger box for VSR10 / SSG10 with the two included mounting screws
    Bolt-E HPA Engine Trigger Box for VSR10 / SSG10
    AMP
    €69.00