VSR10 Upgrades

All the upgrades we make that are compatible with VSR10 platform. Please see product descriptions for detailed compatibility.
    TDC 2.0 modification installed on Tokyo Marui VSR10 replica
    Close-up of the knurled 9.0 marked TDC 2.0 adjustment dial on a VSR10 outer barrel
    Side view showing the low profile TDC 2.0 clearing a large scope objective on a VSR10
    Basic version of the TDC 2.0 thumbscrew on a VSR10 barrel without the external housing
    Installing the TDC grub screw into a drilled VSR10 outer barrel with the included hex key
    TDC 2.0 modification installed inside the VSR10 stock hop up chamber
    TDC 2.0 modification installed inside the VSR10 stock hop up chamber
    internal parts used in TDC 2.0 modification for VSR10 platform
    Four TDC pressure nubs for the VSR10 chamber in black, gray, silver and red
    drill jig for TDC modification installed in an outer barrel
    TDC 2.0 for Tokyo Marui VSR10 Chamber
    TRIDOS.DESIGN
    from €27.00 EUR
    TDC 2.0 Pro clicker wheel installed on a VSR10 outer barrel beneath the scope objective
    Red Action Army CNC VSR10 hop-up chamber with the black TDC 2.0 insert and brass barrel
    Top-down view of the 9.0 mm TDC wheel in its click housing on a VSR10 barrel
    Side profile of a VSR10 showing the low TDC screw clearing the scope objective
    TDC 2.0 Basic knurled wheel mounted directly on the VSR10 outer barrel
    Adjusting the VSR10 TDC grub screw with an allen key just below the scope objective
    Exploded view of the TDC nub carrier that presses vertically on the VSR10 bucking
    Four TDC pressure nubs for the VSR10 chamber in black, gray, silver and red
    Yellow 3.5 mm drill jig seated in the VSR10 outer barrel with a drill in the background
    Contents of the TDC 2.0 Basic and Pro sets for the Action Army VSR10 chamber laid out
    TDC 2.0 for Action Army CNC VSR10 Chamber
    TRIDOS.DESIGN
    from €27.00 EUR
    inner barrel stabilizer for novritsch supressor#size_34-37mm
    inner barrel stabilizer for novritsch supressor#size_34-37mm
    inner barrel stabilizer for novritsch supressor#size_34-37mm
    inner barrel stabilizer for novritsch supressor#size_34-37mm
    inner barrel stabilizer for novritsch supressor#size_34-37mm
    inner barrel stabilizer for novritsch supressor#size_29-33mm
    inner barrel stabilizer for novritsch supressor#size_29-33mm
    inner barrel stabilizer for novritsch supressor#size_29-33mm
    inner barrel stabilizer for novritsch supressor#size_29-33mm
    inner barrel stabilizer for novritsch supressor#size_29-33mm
    Inner Barrel Stabilizer (Suppressor / Outer Barrel)
    TRIDOS.DESIGN
    €12.00 EUR
    Knurled aluminum cylinder nozzle wrench with the engraved Tridos logo on its face
    Numbered pin face of the wrench next to a stainless sniper cylinder and its nozzle
    Hand gripping the knurled wrench to unscrew a stainless airsoft cylinder head
    Wrench face with width settings 1 to 6 and two steel pins installed at position 3
    Side of the wrench body showing the leverage hole for a hex key or screwdriver
    Universal Cylinder Nozzle Wrench
    TRIDOS.DESIGN
    €12.00 EUR
    #type_a1
    #type_a1
    #type_a1
    #type_a1
    #type_a1
    #type_a1
    #type_a1
    #type_a2
    #type_a2
    #type_a2
    M4 Adapter for SSG10 / VSR10
    TRIDOS.DESIGN
    €119.00 EUR
    Sold Out
    Gen2 Flux trigger for VSR10 / SSG10 by Namech
    Front underside view of the Namech Flux trigger for VSR10 showing the curved grey trigger blade
    Gen2 Flux trigger for VSR10 / SSG10 by Namech with removable trigger blade
    Gen2 Flux trigger for VSR10 / SSG10 by Namech installed on SSG10
    Flux trigger installed on a Novritsch SSG10 with black A2 stock, full side profile
    Close-up of the grey Flux trigger blade inside the trigger guard of an SSG10 A2 stock
    All parts included for Gen2 Flux trigger for VSR10 / SSG10 by Namech
    Flux Trigger Gen2.1 for VSR10 / SSG10
    NaMech
    €129.00 EUR
    CNC machined stainless steel BB stopper and upgrade spring for SSG10 / VSR10 hop-up chamber
    Stainless steel BB stopper installed in a VSR10 hop-up chamber with inner barrel and spring visible
    Cylinder-side view of the VSR10 hop-up chamber with stainless steel BB stopper installed
    BB Stopper + Spring Upgrade for SSG10 / VSR10
    TRIDOS.DESIGN
    €12.00 EUR
    Pink Flamingo bucking installed on a stainless inner barrel, bore and key tab visible
    Magenta Flamingo hop up rubber standing upright, showing its moulded alignment tab
    Looking through the Gen3 bucking's bore at the large internal contact patch for heavy BBs
    Flamingo Bucking Gen3 for VSR / GBB
    Sniper Mechanic
    €12.00 EUR
    Orange Modify X-Range bucking installed on a brass VSR inner barrel, front view
    Modify X-Range bucking standing beside a brass barrel with an enlarged hop window
    View inside the X-Range bucking showing the large contact mound that lifts heavy BBs
    Purple X-Range bucking variant fitted on a brass inner barrel for VSR and GBB replicas
    Blue X-Range bucking variant mounted on a brass inner barrel, air seal lip visible
    X-Range Bucking for VSR / GBB
    Modify
    €14.00 EUR
    Maple Leaf MR Hop bucking hardness options next to one installed on a GBB inner barrel
    Blue MR Hop bucking beside a VSR inner barrel with the hop-up window visible
    Front view through the MR Hop bucking showing its wide R-hop style contact patch
    Green hardness variant of the Maple Leaf MR Hop silicone bucking, standing upright
    Yellow MR Hop bucking showing the alignment tab and the metal ring at its base
    Blue Maple Leaf bucking for VSR and GBB barrels, seen from the side
    Pink hardness variant of the MR Hop bucking on a plain white background
    Smoke black translucent GBB bucking variant with silver ring visible at the base
    MR Hop Bucking for VSR / GBB
    Maple Leaf
    €10.00 EUR
    Flamingo Noir bucking for VSR / GBB unbridged barrels
    Black NBR Flamingo Noir hop up bucking standing upright with its alignment tab visible
    contact patch of Flamingo Noir bucking for VSR / GBB unbridged barrels
    Flamingo Noir Bucking for VSR / GBB
    Sniper Mechanic
    €12.00 EUR
    Orange 4UANTUM Friction Pro bucking for VSR and GBB with the soft flat nub beside it
    View through the bore of the 4UAD bucking showing the single-point flat hop nub inside
    4UANTUM Friction Pro bucking installed on the end of a Tokyo Marui spec inner barrel
    4UANTUM Friction Pro Bucking for VSR / GBB
    4UAD
    €11.00 EUR
    Red CNC machined Action Army VSR10 hop up chamber showing the hop window
    Rear of the vsr 10 hop up chamber with the barrel spacer and hop lever fitted
    Action Army hop up chamber with the hop-up lever raised, seen from the front
    Disassembled vsr10 hop up chamber with barrel spacer, spring, nut and grub screws
    Action Army VSR-10 hop-up chamber retail blister packaging, front of the pack
    Back of the packaging with the VSR-10 hop-up chamber operation manual and parts list
    Action Army VSR10 Hop-up Chamber
    Action Army
    €55.00 EUR
    grey action army damping style chamber for VSR10 cnc machined
    grey action army damping style chamber for VSR10 from bottom with feed port visible
    what's included with grey action army damping style chamber for VSR10
    Action Army VSR10 Hop-up Chamber (Grey / Slider Type)
    Action Army
    €55.00 EUR
    CNC aluminum SSG10 full length rail with a built-in bubble level at the rear
    Shooter's view of the bubble level on the VSR10 scope rail preventing rifle cant
    Maple Leaf rail with bubble level mounted on an SSG10 receiver, bolt handle below
    Side profile of the full length picatinny rail installed on an SSG10 sniper rifle
    Macro rear view of the green bubble level set into the end of the scope rail
    Full length SSG10 / VSR10 rail standing alone with the bubble level at the rear end
    Underside of the CNC aluminum rifle rail showing mounting slots and screw holes
    SSG10 / VSR10 Rail with Bubble Level
    Maple Leaf
    €37.00 EUR
    Vector Optics offset bubble level with green vial and allen key for picatinny mounting
    Shooter's view of the offset bubble level indicator mounted beside an LVPO on a rifle rail
    Close-up of the green bubble vial offset to the rail's side under a Victoptics scope
    Offset Bubble Level Indicator
    Vector Optics
    €12.00 EUR
    Gray SORA bucking installed on an airsoft inner barrel ready for an r-hop patch
    SORA r-hop bucking on its side showing the alignment tab and smooth nub-free top
    Interior of the gray SORA bucking viewed from its open rear end on a white background
    SORA Bucking (for R-Hop)
    Modify
    €10.00 EUR
    6.03mm, 300mm inner barrel for VSR10 made by Modify Tech
    modify SSX inner barrel hopup window cutout closeup
    side view of hopup window cutout for modify tech ssx inner barrel for VSR10
    tip of the barrel from modify tech ssx inner barrel for vsr10
    Modify 300mm, 6.03 Inner Barrel for VSR-10
    Modify
    €39.00 EUR
    Sold Out
    6.03mm, 430mm inner barrel for VSR10 made by Modify Tech
    modify SSX inner barrel hopup window cutout closeup
    side view of hopup window cutout for modify tech ssx inner barrel for VSR10
    tip of the barrel from modify tech ssx inner barrel for vsr10
    Modify 430mm, 6.03 Inner Barrel for VSR-10
    Modify
    €49.00 EUR
    red tactical trigger blade for namech flux trigger#color_red
    red tactical trigger blade for namech flux trigger#color_red
    red tactical style Flux Trigger installed in SSG10 / VSR10 A2 stock#color_red
    black tactical trigger blade for namech flux trigger#color_black
    black tactical trigger blade for namech flux trigger#color_black
    black tactical style Flux Trigger installed in SSG10 / VSR10#color_black
    Tactical Trigger Blade for Flux Trigger
    NaMech
    €20.00 EUR
    New
    weighted piston upgrade kit for ssg10 vsr10 with 3 different length airbrakes
    one-piece stainless steel piston for ssg10 / vsr10
    ssg10 piston upgrade comes with 3 different length airbrake pins in the kit
    stainless steel weighted piston for ssg10 with medium size airbrake installed
    amp machine masada cylinder head for ssg10 / vsr10
    amp machine masada cylinder head for ssg10 / vsr10 with rubber dampener
    Ultimate SSG10 / VSR10 Piston + Cylinder Head Kit
    AMP
    €89.00 EUR
    New
    upgraded spring guide for SSG10 / VSR10 airsoft bolt action sniper replica
    upgraded spring guide for SSG10 / VSR10 airsoft bolt action sniper replica
    upgraded spring guide with APS2 rapax spring for ssg10 / vsr10
    Silent Spring Guide Gen2 for SSG10 / VSR10
    NaMech
    €29.00 EUR
    New
    VSR10 / SSG10 trigger box for Bolt E HPA engine.
    Bolt E trigger box for out-of-box installation on VSR10 / SSG10 platforms.
    Gold ceracoted Bolt-E trigger box for VSR10 / SSG10 with the two included mounting screws
    Bolt-E HPA Engine Trigger Box for VSR10 / SSG10
    AMP
    €69.00 EUR