SSR4 / SSR15 Upgrades

Hand selected upgrades and accessories to make your SSR4 / SSR15 even better!

    18 products

    Sold Out
    Titan II ETU upgrade part for airsoft replica in packaging
    Opened box for Titan II mosfet showing what's included in the kit
    closeup of Titan II ETU MOSFET unit from top side
    closeup of Titan II rear wired V2 gearbox AEG version motor cables
    closeup of Titan II for V2 gearbox AEG version battery connector
    GCS App for configuring Titan II ETU and G5 Smart Brushless motor
    Gate Titan II for V2 AEG / Rear wired
    GATE
    €146.00
    Sold Out
    Gate G5 Smart brushless airsoft motor long type from front
    Gate G5 Smart brushless airsoft motor long type showing its pinion gear with d-shaft
    Gate G5 Smart brushless airsoft motor long type from back showing it's connection terminals
    GCS app showing the G5 Smart Brushless Motor on the list of connected devices
    GCS app showing configuration options like speed and torque for Gate G5 Smart Brushless motor
    Gate G5 Smart Brushless Motor / Long
    GATE
    €195.00
    Gate EON Gear Set high speed 13:1 ratio with short stroked sector gear, cnc machined
    Top-down view of Gate EON 13:1 gears showing the SSG-4T short stroked sector gear marking
    Gate EON Gear Set 13:1 / Short Stroked
    GATE
    €36.00
    Orange 4UANTUM Friction Pro AEG bucking with embossed logo and the soft flat nub beside it
    Bore view of the 4UAD AEG bucking showing the single-point flat nub and alignment tab inside
    4UANTUM Friction Pro bucking installed over the window of a stainless AEG inner barrel
    4UANTUM Friction Pro Bucking for AEG
    4UAD
    €11.00
    Sold Out
    Gate Tacticker realistic trigger pull mechanism for airsoft replica
    Gate Tacticker realistic trigger pull mechanism for airsoft replica installed in SSR4 Mk1 with Novritsch ETU
    Close-up of Gate Tacticker clicker module mounted beside the trigger on a V2 gearbox ETU
    Gate Tacticker / Realistic Trigger Clicker
    GATE
    €34.00
    Victoptics S6 1-6x24 scope in a cantilever mount on a Novritsch SSR-15, side view
    Front quarter of the S6 LVPO showing the locking turrets and click adjustment ring
    Back objective lens of the Victoptics scope with throw lever fitted, mounted on a rifle
    Actual view through the scope showing the illuminated green horseshoe reticle and mil tree
    Package contents: S6 1-6x24 scope, two mount rings, flip-up lens covers, cloth and allen key
    Victoptics S6 1-6x24 Variable Scope
    Vector Optics
    €129.00
    Side profile of the low profile canted picatinny rail showing its 30 degree angle
    Offset red dot sight on the canted rail beside the main scope of an airsoft sniper rifle
    Front view of the canted sight mount holding a red dot clear of the rifle's scope
    Empty canted rail section mounted on the receiver's top picatinny rail
    Close-up of the canted rail mount clamped to the top picatinny with two grub screws
    CNC aluminum canted picatinny rail seen from above, showing its accessory slots
    Underside of the offset picatinny rail showing the clamp channel and two grub screws
    Canted 30° Picatinny Rail
    FMA
    €11.00
    inner barrel stabilizer for novritsch supressor#size_34-37mm
    inner barrel stabilizer for novritsch supressor#size_34-37mm
    inner barrel stabilizer for novritsch supressor#size_34-37mm
    inner barrel stabilizer for novritsch supressor#size_34-37mm
    inner barrel stabilizer for novritsch supressor#size_34-37mm
    inner barrel stabilizer for novritsch supressor#size_29-33mm
    inner barrel stabilizer for novritsch supressor#size_29-33mm
    inner barrel stabilizer for novritsch supressor#size_29-33mm
    inner barrel stabilizer for novritsch supressor#size_29-33mm
    inner barrel stabilizer for novritsch supressor#size_29-33mm
    Inner Barrel Stabilizer (Suppressor / Outer Barrel)
    TRIDOS.DESIGN
    €12.00
    4uantum heat resistant gearbox lubricant by 4UAD Smart Airsoft
    tip of 4uantum heat resistant gearbox lubricant pen by 4UAD Smart Airsoft
    4UANTUM Gear / Gearbox Lubricant
    4UAD
    €8.00
    Sold Out
    Pair of Gate Titan II HPA conversion cables with solenoid and ETU plug connectors
    Gate Titan II / AEG to HPA Conversion Cables
    GATE
    €9.00
    20pcs of airsoft gearbox shims in 0.3mm thickness
    20pcs of airsoft gearbox shims in 0.1mm thickness
    Gearbox Shim Set (20pcs)
    FPS Softair
    €5.00
    Black 1.5 inch high red dot mount standing alone, showing its skeletonized riser design
    Victoptics red dot sitting on the tall riser mount, clamped to a rifle's top rail
    Side profile of the elevated red dot mount raising a Victoptics sight above the rail
    Shooter's eye view through a red dot raised 1.5 inches over the picatinny rail
    Red dot with honeycomb filter on the 1.5 inch mount, seen from the front quarter
    Top plate and picatinny clamp of the red dot riser with its two mounting screws
    Top face of the high mount showing screw holes, recoil stop and lightening slots
    1.5" High Red Dot Mount
    Vector Optics
    €18.00
    New
    Vector Optics Maverick 1x22 Gen2 red dot sight with QD riser mount, front-left view
    Maverick Gen2 red dot mounted on an M4 airsoft AEG rifle via the QD picatinny mount
    Close-up of the Maverick Gen2 numbered brightness dial, capped turrets and coated lens
    Maverick 1x22 Gen2 with UP elevation turret, brightness ring and QD lever mount visible
    Sharp 3 MOA aiming dot visible through the lens of the Maverick 1x22 Gen2 red dot sight
    Open CR2032 battery compartment on the Maverick Gen2 red dot with its coin-slot cap removed
    Maverick Gen2 red dot with included low-profile mount and hex tool for airsoft setups
    VectorOptics Maverick 1x22 Red Dot Gen2
    Vector Optics
    €65.00
    New
    EMG odin m12 sidewinder speedloader on white background#color_black
    EMG ODIN M12 sidewinder speedloader filling an airsoft PTS EPM1S magazine#color_black
    ODIN M12 fill port with silicone flaps visible for noise dampening#color_black
    EMG ODIN M12 sidewinder speedloader with silicone insert / sound dampener installed#color_black
    BB retention nozzle preventing BB's from falling out for EMG ODIN M12 speedloader#color_black
    EMG odin m12 sidewinder speedloader on white background#color_red
    EMG ODIN M12 sidewinder speedloader filling an airsoft PTS EPM1S magazine#color_red
    EMG ODIN M12 fill port with silicone flaps visible for noise dampening#color_red
    EMG ODIN M12 sidewinder speedloader with silicone insert / sound dampener installed#color_red
    BB retention nozzle preventing BB's from falling out for EMG ODIN M12 speedloader#color_red
    EMG Odin M12 Sidewinder Speedloader
    EMG
    €49.00
    New
    Flamingo AEG bucking fitted over the hop-up window end of a stainless steel inner barrel
    Pink Flamingo bucking for AEG standing upright, showing its large flat contact patch
    Front view of the Flamingo AEG bucking showing the feed lips and inner bore
    Flamingo Bucking for AEG
    Sniper Mechanic
    €12.00
    Discontinued
    Guide TE211M thermal monocular showing a thermal image of a standing person through the lens
    Front lens of the Guide TE211M with red ring detailing, wrist strap, and lens cap removed beside it
    Guide TE211M monocular with lens cap on, wrist strap attached, and TE211M model label visible on the body
    Rear view of the TE211M showing the mounting threads, lens cap, and regulatory markings on the housing
    Close-up of the TE211M USB-C charging port with its rubber cover lifted and the focus ring beside it
    Guide TE211M with lens cap fitted over the front optic and the Guide logo on the side panel
    Guide Thermal Monocular TE211M (Unlocked)
    Guide
    €449.00
    New
    TE211M thermal with the titanium protector fitted and a picatinny top rail for a red dot
    Vector Optics red dot mounted on top of a Guide thermal monocular on an SSR-4 airsoft rifle
    The Guide TE210MS in the bundle, showing a white-hot figure in its viewfinder
    OwlSet thermal monocular with protector and mount base, T1 style rail mount shown as not included
    Kit contents: titanium mesh protector with flip cap, mount base, clamp ring and mounting screws
    Top mount kit contents: CNC aluminum clamp, picatinny rail section and six mounting screws
    Guide TE210MS Thermal + Protector Bundle
    TRIDOS.DESIGN
    €547.00 €498.00
    New
    The Guide TE210MS in the bundle, showing a white-hot figure in its viewfinder
    Objective lens of the Guide TE210MS thermal monocular, cap removed and wrist lanyard fitted
    Guide TE210MS thermal monocular with the lens cap on and the model marking on its housing
    Underside of the Guide TE210MS thermal monocular showing its tripod thread and mounting holes
    USB-C charging port of the Guide TE210MS thermal monocular under its weather-sealed flap
    Guide TE210MS thermal monocular, side view with the lanyard
    Magnetic molle carrying case of the Guide TE210MS thermal monocular, closed
    Guide TE210MS thermal monocular inside its open magnetic molle carrying case
    Guide Thermal Monocular TE210MS (Unlocked)
    Guide
    €479.00