🔥 New Arrivals

Latest and greatest - everything that has been recently added to our offering!
    New
    Vector Optics Maverick 1x22 Gen2 red dot sight with QD riser mount, front-left view
    Maverick Gen2 red dot mounted on an M4 airsoft AEG rifle via the QD picatinny mount
    Close-up of the Maverick Gen2 numbered brightness dial, capped turrets and coated lens
    Maverick 1x22 Gen2 with UP elevation turret, brightness ring and QD lever mount visible
    Sharp 3 MOA aiming dot visible through the lens of the Maverick 1x22 Gen2 red dot sight
    Open CR2032 battery compartment on the Maverick Gen2 red dot with its coin-slot cap removed
    Maverick Gen2 red dot with included low-profile mount and hex tool for airsoft setups
    VectorOptics Maverick 1x22 Red Dot Gen2
    Vector Optics
    €65.00 EUR
    New
    3D printed SSX303 folding stock adapter in black PA12 nylon beside its flat plate
    Adapter shown installed between the greyed-out SSX303 receiver and the ARES stock
    SSX303 with the ARES folding stock extended via the adapter, resting on a display stand
    Front three-quarter view of the SSX303 build with the folding stock deployed and scope fitted
    Close-up of the hinge joining the ARES foldable stock to the SSX303 receiver
    SSX303 with its folding stock folded flat along the receiver for compact storage
    Rear face of the nylon adapter showing the central screw hole and rectangular cutout
    Hand holding the adapter to show the internal lattice ribs and embedded steel nut
    SSX303 Folding Stock Adapter
    TRIDOS.DESIGN
    €29.00 EUR
    New
    PTT guard and volume dial kit for Baofeng UV-5RM / UV-5RH
    Baofeng UV-5RM radio with PTT guard installed
    UV-5RM radio with PTT blocker installed and volume dial upgrade
    Baofeng UV-5RM with PTT guard installed and volume dial with o-ring
    Baofeng UV-5RM with PTT blocker installed and volume dial with o-ring
    Baofeng UV-5RM with PTT guard installed and an external PTT cable plugged in securely covered with a ranger band
    Baofeng UV-5RM with volume dial o-ring mod upgrade
    Aluminum volume knob with o-ring mod for the UV-5RM, removed and next to the bare shaft of the radio
    Baofeng PTT Guard + Volume Dial for UV-5RM / UV-5RH
    TRIDOS.DESIGN
    €15.00 EUR
    New
    PTT guard kit and o-ring mod for Baofeng UV-82
    Baofeng UV-82 with PTT guard installed to prevent hotmic
    Baofeng UV-82 with PTT guard installed to prevent hotmic
    Baofeng UV-82 with PTT guard installed with external PTT plugged in
    Baofeng UV-82 with aluminum volume dial with o-ring mod installed
    Knurled aluminum volume knob removed from the Baofeng UV-82, showing the o-ring friction mod
    Baofeng PTT Guard + Volume Dial for UV-82
    TRIDOS.DESIGN
    €15.00 EUR
    New
    Airtac AT200 HPA regulator with large pressure gauge and US-spec foster fitting, front view
    Top view of the Airtac AT200 showing the pressure adjustment interface and included green tool
    AT200 regulator lid locked with a zip-tie to prevent power adjustments at airsoft events
    Airtac AT200 HPA regulator mounted on an air bottle with a Superflex HPA line connected
    Airtac AT200 regulator laid out with its perforated lid disc and green power adjustment tool
    Airtac HPA Regulator AT200
    Airtac.me
    €83.00 EUR
    New
    40inch hpa air line with black braided sleeve and US spec foster fittings for airsoft / paintball use
    40inch hpa air line with black braided sleeve and US spec foster fittings for airsoft / paintball use
    hpa air line with black braided sleeve and US spec foster fittings attached to a AAP-01 shot shell adapter
    40inch hpa air line with black braided sleeve and US spec foster fittings attached to airtac AT200 regulator
    Airtac Superflex 40" HPA Line
    Airtac.me
    €25.00 EUR
    New
    HPA pistol adapter for airsoft replica AAP-01 that uses shotgun shell magazines
    AAP01 shotgun shell HPA adapter with a red 30rd CYMA shell inserted and HPA line attached
    Side profile of the AAP-01 HPA adapter marked CYMA shells only, with a shell loaded inside
    AAP-01C pistol with HPA shotgun shell adapter installed
    AAP-01C pistol with HPA adapter installed
    AAP-01 / Glock - Shotgun Shell HPA Adapter
    Airtac.me
    €129.00 EUR
    New
    weighted piston upgrade kit for ssg10 vsr10 with 3 different length airbrakes
    one-piece stainless steel piston for ssg10 / vsr10
    ssg10 piston upgrade comes with 3 different length airbrake pins in the kit
    stainless steel weighted piston for ssg10 with medium size airbrake installed
    amp machine masada cylinder head for ssg10 / vsr10
    amp machine masada cylinder head for ssg10 / vsr10 with rubber dampener
    Ultimate SSG10 / VSR10 Piston + Cylinder Head Kit
    AMP
    €89.00 EUR
    New
    ssx23 shotgun shell hpa adapter by airtac x t1p
    shotgun shell hpa adapter for ssx23, mk23 airsoft replica
    low profile hpa adapter for ssx23, mk23, ssx303, cnc machined by airtac x t1p
    hpa adapter for ssx23 / mk23 by airtac.me
    MK23 / SSX23 shotgun shell HPA adapter with a red CYMA shell installed in the magazine body
    shotgun shell hpa adapter for ssx23 / mk23 from side
    SSX23 / MK23 - Shotgun Shell HPA Adapter
    Airtac.me
    €129.00 EUR
    New
    airtac ssx23 / mk23 hpa adapter
    airtac ssx23 mp5 hpa adapter from front
    airtac ssx23 / mk23 hpa adapter mp5 version, showing bb retention mechanism
    mk23 / ssx23 replica with mp5 hpa adapter installed and short 60rd cyma magazine
    mk23 / ssx23 nano carbine kit replica with mp5 hpa adapter installed and short 60rd cyma magazine
    SSX23 / SSX303 - MP5 Magazine HPA Adapter
    Airtac.me
    €109.00 EUR
    Now for TM
    Right-handed SSX23 holster mount kit with aluminum plate, spacer parts and steel screw#side_right-handed
    SSX23 / MK23 pistol with suppressor beside the Novritsch Open Universal Holster#side_right-handed
    Close-up of the holster mount adapter installed above the SSX23 / MK23 trigger guard#side_right-handed
    Rear view of the SSX23 / MK23 showing the holster mount screw fitted through the frame#side_right-handed
    mounting screw for SSX23 mount / adapter for Novritsch Open Universal Holster, right handed#side_right-handed
    Suppressed SSX23 / MK23 clipped into the Novritsch Open Universal Holster, held in hand#side_right-handed
    Disassembled SSX23 / MK23 with holster mount spacer parts installed in frame and slide#side_right-handed
    Left-handed SSX23 holster mount kit with bracket, steel screw, spacers and holster block#side_left-handed
    Left side of a suppressed SSX23 / MK23 pistol next to the Novritsch Open Universal Holster#side_left-handed
    Close-up of the left-hand holster mount bracket above the SSX23 / MK23 trigger guard#side_left-handed
    Tokyo Marui MK23 Mount for Open Universal Holster
    TRIDOS.DESIGN
    €29.00 EUR