TDC 2.0 for Tokyo Marui VSR10 Chamber
- Low stock - 4 items left
- Inventory on the way
Pairs well with:
Included inĀ BASIC & PRO:
- 1x 9.0mm thumbscrew
- 2x o-rings (only for BASIC installation)
- 1x M3 grub-screw
- 1x nylon arm / insert
- 1x custom M3 aluminum nut
- 3x different aluminum nubs (black, gray and silver)
- 1x universal nub (red)
- 1x set of drill jigs
- 3.5mm drill bit
Included onlyĀ in PRO:
- 1x external housing
- 1x plunger (pre-installed)
- 1x springĀ (pre-installed)
- 1x M3 set screwĀ (pre-installed)
- 1x spare set of double sided tape
Worldwide shipping starts at 8ā¬ and is calculated during checkout.
Orders are usually fulfilled in 1-2 working days and are sent from Latvia (Europe).
ā Duties may apply if you're based outside EU customs union!
SINGLE BEST PERFORMANCE UPGRADE FOR VSR10. PERIOD.
ā Ā CHECK FOR CHAMBER COMPATIBILITY BELOW BEFORE BUYING!
This modification removes the stock hopup arm / slider mechanism and replaces it withĀ a thumbscrew that pushes down from the top. You can make insanely precise adjustments this way and tune your shooting trajectory to perfection.Ā
Compatibility
TDC 2.0 isĀ compatible withĀ any bucking / r-hop.Ā This version of TDC 2.0 isĀ compatibleĀ only with non-bridged barrels.
Our TDC's areĀ designed to fitĀ only a specific chamber.Ā Here are the exact compatible chambers thatĀ this version of TDC 2.0Ā works with:
Genuine Tokyo Marui VSR10 chamber | ā |
JG BAR10Ā stock chamber |
ā |
Cyma CM.701Ā stock chamber |
ā |
WELL MB02 / MB03 stock chamber | ā fits with modifications |
Maple Leaf MLC-338 stock chamber | ā fits with modifications |
Action Army T11 stock chamber | ā fits with modifications |
CNC Action Army VSR10 chamber | āĀ different version needed |
SSG10 A1/A2/A3 stock chamber | āĀ different version needed |
Double Bell VSR-10 stock chamber | ā |
Lowest profile on the market
Don't have clearance for TDC you say? Our TDC requires a clearance ofĀ justĀ 5.0mm,Ā which means it will work even with the biggest scopes andĀ low scope rings.
It's not going anywhere
The screw is installed in 1/2 aluminum, 1/2 undersized Nylon thread which provides the ultimate combination of durability and resistance to the screw.Ā O-rings and external housing provideĀ additional resistance.Ā Trust me - it's not moving by itself.
No epoxy gluing
We really didn't likeĀ the idea of having to permanently glue something on the outside of the barrel. That's why our TDC is an all-internal upgrade thatĀ installs inside the stock hop-up chamberĀ and requires no gluing. For the PRO version, theĀ external housing comes withĀ pre-installed strong double sided 3M tapeĀ for easy installation and easy removal without damaging the gun. We even include a spare set of tape in the kit.
Vertical pressure nub system
Our TDC replaces traditional hop-up arms with CNC machined aluminum nubsĀ that provideĀ perfectly vertical pressureĀ to the bucking. Each TDC comes withĀ 3x different nubsĀ so you can choose whichever you like the best or use the red universal nub with any off-the-shelf nub like ML Omega / Panthera / soft nub / etc.
Fool-proof installation
We made sure that ourĀ TDC 2.0 can be installed with any level of skill.Ā We made sure that our drill jigs are usable with handheld drills, the process is dead simple and there's no way you can mess it up.Ā
We also haveĀ detailed step-by-step installation videosĀ from start to finish.
PRO vs. BASIC
PROĀ version provides the absolute perfection in terms of feedback and looks. The external aluminum housingĀ provides a satisfying click to the thumbscrewĀ that allows to precisely adjust the TDC andĀ protects the screw from accidental bumps. It also acts as an extra safety layer to make sure the screw doesn't turn by itself.
BASICĀ version provides theĀ same internals and performanceĀ of the TDC 2.0 PRO butĀ at a more affordable price point, just without the external aluminum housing (clicking mechanism). In case you ever change your mind, you can purchase theĀ TDC 2.0 Pro UpgradeĀ separately at any timeĀ to get the full experience!
Materials
All of the parts in the kit, except for the drill jig, areĀ CNC machined aluminum and NylonĀ (some pictures can be outdated). Everything is made to fit flawlessly together with no wobble whatsoever. They look and feel exceptional.
Required for installation:
- drill or drill-press
- beer (optional)