PTT guard kit and o-ring mod for Baofeng UV-82
Baofeng UV-82 with PTT guard installed to prevent hotmic
Baofeng UV-82 with PTT guard installed to prevent hotmic
Baofeng UV-82 with PTT guard installed with external PTT plugged in
Baofeng UV-82 with aluminum volume dial with o-ring mod installed
Baofeng UV-82 with aluminum volume dial with o-ring mod installed
PTT guard kit and o-ring mod for Baofeng UV-82
Baofeng UV-82 with PTT guard installed to prevent hotmic
Baofeng UV-82 with PTT guard installed to prevent hotmic
Baofeng UV-82 with PTT guard installed with external PTT plugged in
Baofeng UV-82 with aluminum volume dial with o-ring mod installed
Baofeng UV-82 with aluminum volume dial with o-ring mod installed

Baofeng PTT Guard + Volume Dial for UV-82

€15.00 EUR
/
Tax included.
Radio model
UV-82
  • In stock, ready to ship
  • Backordered, shipping soon

Pairs well with:
  • 1x PTT guard
  • 2x M2.5*8 screws
  • 1x volume dial
  • 1x 7*1 o-ring
  • 1x M3*4 grub screw (pre-installed)
  • 1x black EPDM rubber band
  • 1x ranger green silicone rubber band

Installation guide:

  1. Replace beltclip with PTT guard using the 2 screws that came with the radio. Add the rubber band over the radio and PTT Guard.
  2. Remove original volume dial by pulling it off.
  3. Partially unscrew grub screw on the aluminum volume dial using 1.5mm hex key and add the o-ring in the groove on the dial by holding it upside down.
  4. Turn the radio upside down and align the D-shaft with grubscrew. Push the dial on and apply pressure to make sure o-ring is slightly squished.
  5. Secure the grubscrew tightly (thread glue is recommended). You can also remove the o-ring entirely if the dial is too hard to turn.

Worldwide shipping starts at 8€ and is calculated during checkout.

Orders are usually fulfilled in 1-2 working days and are sent from Latvia (Europe).

⚠ Duties may apply if you're based outside EU customs union!

→ Prevent accidental volume adjustments
→ No more hotmicing

Baofeng PTT Guard in combination with volume dial is a must-have upgrade kit for any airsoft player or radio enthusiast. This kit includes:

  • PTT guard to avoid accidentally pressing transmit button (especially when in a soft pouch)
  • Volume dial with o-ring to prevent unintentional volume adjustments
  • Rubber band to keep the PTT guard and comms plug extra secure

This Baofeng PTT guard is made specifically for genuine Baofeng UV-82 model to prevent hotmicing. Our PTT guard is made from durable PA12 Nylon and is fixed in place with the original screws used to mount the belt clip.

Our aluminum volume dial comes with an o-ring that adds extra friction to prevent accidental adjustments and has a nice knurling pattern that makes it easy to adjust even with gloves on.

While the PTT guard sits tightly against the radio by itself we often found ourselves using a rubber band to secure the comms cable tightly so we included it as well and made a special groove for it in the PTT guard. Now comes with 1x black EPDM and 1x OD green silicone band

Compatibility

✔ Compatible with Baofeng UV-82

⟵ Back to New Arrivals

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

You may also like