M4 magwell adapter with rib-slotted top, angled grip, and included spring, screw, and BB stopper part.
Adapter fitted under a Novritsch SSG10 rifle stock with an M4 magazine inserted and a scope mounted above
Close-up of the adapter&
Adapter body shown apart from an inserted M4 magazine, with an angled wrench tool resting nearby.
Side view of the adapter showing the latch tab, textured grip panel, and small hex bolt on the lower body.
Underside view of the adapter revealing the internal latch mechanism and ribbed magazine channel.
Angled top-down view of the adapter&
Adapter with ribbed top, angled grip, and included spring, screw, and BB stopper laid out beside it.
Adapter and magazine attached beneath the stock of a Novritsch SSG10 rifle fitted with a scope.
Close-up of the adapter&
Adapter body shown separately from an M4 magazine, with the included hex key beside it.
Side view of the adapter showing the vented body, latch lever, and rear locking tab.
Bottom view of the adapter looking into the open magwell channel and latch mechanism.
Angled top-down view of the adapter attached to an M4 magazine with orange follower visible.
Adapter with M4 magazine and included small parts, spring, screw, and rail piece laid out beside it.
Adapter mounted under a Novritsch SSG-10 rifle with an M4 magazine inserted and scope attached above.
Close-up angled view of the adapter&
M4 adapter and M4 magazine lying separately, showing the adjustable magwell and adjustment tool
Angled rear view of the adapter showing the textured grip panel and front and back latching tabs
Underside view of the adapter showing the open magwell channel and internal latch mechanism
M4 magazine adapter for the SSG10 / VSR10, A3 version, with an M4 magazine locked into the magwell
M4 magwell adapter with rib-slotted top, angled grip, and included spring, screw, and BB stopper part.#type_a1
Adapter fitted under a Novritsch SSG10 rifle stock with an M4 magazine inserted and a scope mounted above#type_a1
Close-up of the adapter's ribbed top rail, latch button, and textured angled grip mounted above a magazine.#type_a1
Adapter body shown apart from an inserted M4 magazine, with an angled wrench tool resting nearby.#type_a1
Side view of the adapter showing the latch tab, textured grip panel, and small hex bolt on the lower body.#type_a1
Underside view of the adapter revealing the internal latch mechanism and ribbed magazine channel.#type_a1
Angled top-down view of the adapter's rail slots and front locking block above the grip and magazine.#type_a1
Adapter with ribbed top, angled grip, and included spring, screw, and BB stopper laid out beside it.#type_a2
Adapter and magazine attached beneath the stock of a Novritsch SSG10 rifle fitted with a scope.#type_a2
Close-up of the adapter's top vents, engraved model code, and angled grip texture.#type_a2
Adapter body shown separately from an M4 magazine, with the included hex key beside it.#type_a2
Side view of the adapter showing the vented body, latch lever, and rear locking tab.#type_a2
Bottom view of the adapter looking into the open magwell channel and latch mechanism.#type_a2
Angled top-down view of the adapter attached to an M4 magazine with orange follower visible.#type_a2
Adapter with M4 magazine and included small parts, spring, screw, and rail piece laid out beside it.#type_a3
Adapter mounted under a Novritsch SSG-10 rifle with an M4 magazine inserted and scope attached above.#type_a3
Close-up angled view of the adapter's ribbed top and textured angled grip section.#type_a3
M4 adapter and M4 magazine lying separately, showing the adjustable magwell and adjustment tool#type_a3
Angled rear view of the adapter showing the textured grip panel and front and back latching tabs#type_a3
Underside view of the adapter showing the open magwell channel and internal latch mechanism#type_a3
M4 magazine adapter for the SSG10 / VSR10, A3 version, with an M4 magazine locked into the magwell#type_a3
TRIDOS.DESIGN

M4 Adapter for SSG10 / VSR10

€119.00 EUR
/
Tax included. Shipping calculated at checkout.
Type
  • In stock, ready to ship
  • Backordered, shipping soon

Pairs well with:
  • 1x M4 adapter
  • 1x hop chamber spring upgrade
  • 5x height blocks
  • 1x M2.6x8 screw

Worldwide shipping starts at 7.90€ and is calculated during checkout based on location.

Orders are usually fulfilled in 1-2 business days and are shipped from our warehouse in Netherlands.

⚠ Duties may apply if you're based outside EU economic zone

⚠ CHECK FOR COMPATIBILITY BEFORE BUYING

→ USE ANY M4 MAGAZINE
→ DOUBLES AS ANGLED GRIP
→ ADJUSTABLE M4 MAGWELL 

This allows your SSG10 / VSR10 to take pretty much any M4 magazine. Forget about reloading and focus on shooting!

  • Made from durable PA12 Nylon
  • BB retention mechanism
  • Adjustable magwell for M4 magazines
  • Latching mechanism in front and back

Compatibility

This is a list of compatible replicas that we have personally tested. Compatibility with any other stock or replica outside this chart is unknown.

Use this table to select the correct adapter type:

Replica Type
 Novritsch SSG10 A1 A1
 Novritsch SSG10 A2 A2
 Novritsch SSG10 A3 A3
Tokyo Marui VSR10 A1
Jing Gong BAR10 A1
WELL MB02 A1
Cyma CM.700 A1
Maple Leaf MLC 338 A2
Maple Leaf MLC-S1 stock A2
Maple Leaf MLC-S2 stock
A3

Back-side locking

To make the best possible product, it was not possible to make a universal SSG10 / VSR10 adapter that would work perfectly in every possible stock for VSR10 platform.

We chose to make 3 versions for most popular stock options on the market that each have different back-side locking mechanism. They will not fit in a different stock - if they do, it's a pure coincidence.

Adjustable magwell

The M4 magwell on the adapter is adjustable to enable use of practically any M4 magazine on the market and make it fit perfectly without any wobble.

⚠ Not all M4 magazines are capable of reliably feeding 0.40g+ BB's

To avoid any possible issues with using the adapter, we strongly recommend to use high quality M4 magazines with strong feed springs. Some known good magazines:

  • PTS EPM / 150rd
  • PTS EPM1 / 250rd
  • PTS EPM1S / 170rd
  • ARES Amoeba Short / 120rd

Spring upgrade required

Adapter comes with a stronger BB stopper spring included in the kit. This is required to avoid double-feeding with strong mid-cap M4 magazines. This spring is compatible with most split VSR10 style hop chambers.

The increased strength of the spring might increase wear on the plastic BB retention arm! If this is a problem, we offer an upgraded metal BB stopper.

Durability

The body is made out of a single piece Nylon PA12 while the latch and BB retention mechanism is made out of CNC machined aluminum. This makes the adapter extremely durable and will last you.

⟵ Back to SSG10 Upgrades

You may also like