Upgraded PA12 nylon mag follower next to the stock SSX23 follower for comparison

Before and after BB capacity comparison in an SSX23 magazine with the upgraded follower

Loaded SSX23 mag lying flat with BBs stacked along the channel up to the new follower

BB bottle with orange nozzle filling an MK23 magazine fitted with the upgraded follower

Magazine feed lips with the upgraded follower&

Six mag followers on the 3D print sprue with the included 2 mm installation pin

Magazine feed lips with the upgraded follower's larger pull tab visible at the top

TRIDOS.DESIGN

SSX23 / MK23 Mag Follower Upgrade (6-pack)

Name: SSX23 / MK23 Mag Follower Upgrade (6-pack)
Brand: TRIDOS.DESIGN
SKU: 23-UMFA
Price: 14.0 EUR
Availability: InStock

€14.00

Tax included. Shipping calculated at checkout.

Quantity

In stock

6x mag followers
1x 2mm pin for installation

Installation video

Worldwide shipping starts at 7.90€ and is calculated during checkout based on location.

Orders are usually fulfilled in 1-2 business days and are shipped from our warehouse in Netherlands.

⚠ Duties may apply if you're based outside EU economic zone

These are upgraded SSX23 followers for Novritsch / ASG magazines which feature:

4-5 additional BB capacity
empty mag trigger locking
larger pull tab for easier loading

These will fit inside Tokyo Marui mags but trigger lock might not work. Comes with a 2mm pin for installation.

⚠ Not compatible with Novritsch Gen3 mags

⚠ MODIFICATION REQUIRED FOR OLDER STYLE MAGS TO MAKE USE OF INCREASED CAPACITY. WE RECOMMEND GETTING DRILL JIG KIT TO MAKE THE MODIFICATIONS! SEE THE DIAGRAM:

Magazine follower upgrade increases capacity by 4-5 BBs (from 29 to 33-34 rounds). Most customers praised "easy installation" with video tutorials and the "End-Block" function. However, some reported follower jamming issues in SSX23 magazines and a design flaw affecting nozzle movement when empty. Compatible with both SSX and Tokyo Marui magazines.

5 stars: 7 (78%)
4 stars: 0 (0%)
3 stars: 1 (11%)
2 stars: 1 (11%)
1 star: 0 (0%)

Follower Gets Stuck

Unfortunately, these upgraded mag followers do not work properly in my SSX23 magazines.

They feed the first few BBs normally, but after a couple of shots the follower gets stuck and stops pushing the BBs upward completely. I then have to remove the magazine and manually push the follower upward to restore feeding.

After doing this, the magazine works again for a few shots, but the exact same problem quickly returns. This happens repeatedly and makes the magazine very unreliable during use. This issue occurs consistently with four different SSX23 magazines.

Design flaw

The mag follower works, but its design makes it tricky for the trigger to push the nozzle through, especially when there are no BBs in the chamber. Unlike the original TM MK23 follower, which has an angled slot for the nozzle head, this one doesn’t have that. Please redesign it.

Hi Dan! As stated in the product description, this is actually a feature not a design flaw. We implemented empty mag trigger locking so that you would know when your magazine is out of BB's.

OK product

Installation easy, instructions video available, higher mag capacity confirmed.

Five more Bbs for less Money

The capacity has increased from 29 to 34 BBs per magazine. Works without any problems and absolutely recommended for the price. The exchange went without any problems and took a maximum of 2 minutes.

Very nice Upgrade

The Installation was very easy and the the benefit is awesome. Easy to hold and load now.
Nozzle stop works not (i have done some modifications on my Nozzle that's the reason why), also on my New SSX it only works sometimes depending which Magazine i use. But for me no Problem.

So in summary: Great product, nice benefit, easy Installation and it works flawless.

Works just great!

I ordered these for different MK23 mags. I have 2 from Ascend and 2 from Tokyo Mauri, the follower work flawlessly with all 4 of my magazines, giving me 4-5 more BBs. And also the locking function is great. so I know when the mag is empty. Took a little time to get used to, but it's a nice feature!

They come on a small frame and you have to break them out, what works flawlessly. and luckily they made them stuck at the bottom, where no residue of the plastic would interfere with the overall functionality. My inner revell kit child still sanded it down, but you don't need to.
overall 10/10 product.

Tactical advantage…

…with these.
While the asking price might occur a lot for the small parts, consider the advantage of your Novritsch SSX mags now easily holding 32 rounds each and super fast and easy reloads with the Unicorn adapter to top things off. Superb and an absolute no-brainer once you check for yourself !

Amazing

Great system. Easy change and with the tutorial even better. My mag +- 28bb goes to +-31bb.
The "End-Block" function of the mag is super enjoyable. I'm waiting to test it in the field on Sunday.Thx Tridos

Take my money!

Great system! Easy change in 30 sec max.
I have a Tokyo Marui magazine and it's work perfectly! (firing test ok, no misfeed).
So Tridos, you can change your title :).

TM origin: 29bbs
With these followers: 33bbs

And I valid too the "End-Block" function of the mag.

Danke sehr Tridos!

Will a mag follower for the Novritch SSX23 gen 3 mags be available in the near future ?

TRIDOS.DESIGN

We currently don't plan to make one for Gen3 mags as the only difference would be the locking function. The standard follower on Gen3 mags already has larger capacity by default which is the main benefit for this follower upgrade part.