Search

31 results
    SSG10 TDC 2.0 Pro clicker wheel installed on the outer barrel under the scope objective
    Low-profile TDC 2.0 Basic thumbscrew on an SSG10 outer barrel below a 3-9x40 scope
    Knurled TDC hop up adjustment wheel seated directly on the fluted SSG10 outer barrel
    SSG10 with the TDC 2.0 screw fitted, showing clearance beneath a large scope objective
    Fingertip guiding an allen key to the TDC 2.0 grub screw on an SSG10 outer barrel
    Stock SSG10 hop-up chamber with the black TDC 2.0 nub carrier and brass inner barrel
    Assembled SSG10 hop-up chamber with bucking, TDC 2.0 on top and brass inner barrel
    TDC 2.0 nub carrier for the SSG10 chamber beside one CNC machined aluminum nub
    Set of three TDC 2.0 pressure nubs for SSG10 in black, gray and silver finishes
    Red 3.5 mm drill jig seated in the SSG10 outer barrel cutout during TDC installation
    TDC 2.0 for SSG10 Chamber
    TRIDOS.DESIGN
    from €27.00 EUR
    TDC 2.0 Pro clicker wheel installed on a VSR10 outer barrel beneath the scope objective
    Red Action Army CNC VSR10 hop-up chamber with the black TDC 2.0 insert and brass barrel
    Top-down view of the 9.0 mm TDC wheel in its click housing on a VSR10 barrel
    Side profile of a VSR10 showing the low TDC screw clearing the scope objective
    TDC 2.0 Basic knurled wheel mounted directly on the VSR10 outer barrel
    Adjusting the VSR10 TDC grub screw with an allen key just below the scope objective
    Exploded view of the TDC nub carrier that presses vertically on the VSR10 bucking
    Four TDC pressure nubs for the VSR10 chamber in black, gray, silver and red
    Yellow 3.5 mm drill jig seated in the VSR10 outer barrel with a drill in the background
    Contents of the TDC 2.0 Basic and Pro sets for the Action Army VSR10 chamber laid out
    TDC 2.0 for Action Army CNC VSR10 Chamber
    TRIDOS.DESIGN
    from €27.00 EUR
    TDC 2.0 modification installed on Tokyo Marui VSR10 replica
    Close-up of the knurled 9.0 marked TDC 2.0 adjustment dial on a VSR10 outer barrel
    Side view showing the low profile TDC 2.0 clearing a large scope objective on a VSR10
    Basic version of the TDC 2.0 thumbscrew on a VSR10 barrel without the external housing
    Installing the TDC grub screw into a drilled VSR10 outer barrel with the included hex key
    TDC 2.0 modification installed inside the VSR10 stock hop up chamber
    TDC 2.0 modification installed inside the VSR10 stock hop up chamber
    internal parts used in TDC 2.0 modification for VSR10 platform
    Four TDC pressure nubs for the VSR10 chamber in black, gray, silver and red
    drill jig for TDC modification installed in an outer barrel
    TDC 2.0 for Tokyo Marui VSR10 Chamber
    TRIDOS.DESIGN
    from €27.00 EUR
    TDC 2.0 hop up adjustment wheel installed on an SSG24 outer barrel beneath the scope objective
    Side view of the low-profile TDC thumbscrew on an SSG24, clearing the scope with room to spare
    Close-up of the knurled TDC 2.0 wheel between an SSG24 barrel and a 3-9x40 scope
    SSG24 with TDC 2.0 installed, showing the 5 mm clearance under a low-mounted scope
    Fingertip guiding an allen key to the TDC grub screw on an SSG24 outer barrel
    SSG24 hop-up chamber with the black TDC 2.0 nub carrier fitted, seen from the muzzle side
    TDC 2.0 mounted on top of an SSG24 hop-up chamber with the stock green bucking in place
    TDC 2.0 nub carrier for the SSG24 chamber next to one CNC machined aluminum pressure nub
    Three CNC machined pressure nubs in black, gray and silver included with TDC 2.0 for SSG24
    Orange 3D-printed installation jig clamped around an SSG24 outer barrel for TDC fitting
    TDC 2.0 for SSG24 Chamber
    TRIDOS.DESIGN
    from €27.00 EUR
    TDC 2.0 PRO adjustment dial mounted on the SSG96 twisted outer barrel below the scope
    Side view showing the low-profile TDC housing clearing the scope objective on the SSG96
    TDC 2.0 thumbscrew dial beside the etched HOP marking on the SSG96 outer barrel
    Adjusting the TDC 2.0 Basic hop-up screw through the barrel port with an allen key
    TDC threaded insert fitted to the stock SSG96 hop-up chamber on the brass inner barrel
    Exploded view of the TDC 2.0 pressure bar, threaded plate and vertical hop-up nub
    The three included CNC machined nubs in black, ridged grey and silver aluminum
    Included drill jig clamped on the SSG96 barrel with a drill ready for the TDC hole
    Contents of the TDC 2.0 Basic and PRO sets: jig, drill bit, thumbscrew, nubs, 3M tape
    TDC 2.0 for SSG96 Stock Chamber
    TRIDOS.DESIGN
    from €27.00 EUR
    TDC 2.0 PRO clicker dial mounted on an SSG10 Full Thrust outer barrel under the scope
    Low-profile TDC housing on the SSG10 barrel showing clearance under a large scope
    Adjusting the basic TDC 2.0 hop-up screw on an SSG10 with the included hex key
    Gold SSG10 Full Thrust hop-up chamber with the TDC 2.0 insert installed on top
    Exploded diagram of the TDC 2.0 insert with two screws, brass plate, block and nub
    Assembled TDC 2.0 insert block for the SSG10 Full Thrust hop-up chamber
    CNC machined aluminum hop-up nubs for the TDC 2.0 in different profiles and colors
    Orange drill jig fitted in the SSG10 outer barrel next to a cordless drill and bit
    What's included in the SSG10 TDC set: drill jig, drill bit, dial, nubs and 3M tape
    TDC 2.0 for SSG10 Full Thrust Chamber
    TRIDOS.DESIGN
    €39.00 EUR
    TDC 2.0 Pro Clicker Upgrade Unit with spare adhesive tape Gen2
    TDC 2.0 Pro Clicker Upgrade Unit Spare Part Gen2
    TDC 2.0 Pro Upgrade Gen2
    TRIDOS.DESIGN
    €13.00 EUR
    TDC 2.0 PRO adjustment dial installed on a fluted L96 outer barrel below the scope
    Side profile of the low TDC 2.0 housing showing scope clearance on an L96 rifle
    TDC 2.0 PRO clicker dial with HOP marking on the L96 barrel seen from the shooter side
    Adjusting the basic TDC 2.0 for L96 with a hex key at the HOP arrow marking
    Blue Action Army L96 hop-up chamber with the black TDC 2.0 insert plate installed
    Assembly diagram of the TDC 2.0 insert: knurled top plate, insert bar and pressure nub
    Assembled black TDC 2.0 insert for the L96 Action Army chamber with nub fitted
    Three CNC machined aluminum pressure nubs supplied with the TDC 2.0 for L96
    L96 TDC set contents for Basic and PRO: drill jig, drill bit, hardware, dial and 3M tape
    TDC 2.0 for L96 Action Army Chamber
    TRIDOS.DESIGN
    from €27.00 EUR
    Top of the Gen2 TDC 2.0 replacement thumbscrew with laser-etched 0-50 scale
    Underside of the Gen2 TDC thumbscrew with a groove ring around the threaded stem
    TDC 2.0 replacement thumbscrew underside without the base groove, thread fully visible
    TDC 2.0 Thumbscrew Replacement
    TRIDOS.DESIGN
    €9.00 EUR
    TDC 2.0 replacement arm and threaded nut for the Action Army VSR10 hop-up chamber
    TDC 2.0 Arm + Nut for Action Army VSR10
    TRIDOS.DESIGN
    €10.00 EUR
    Three 3M 300LSE adhesive pads for mounting the TDC 2.0 Pro hop-up tuner to an outer barrel
    TDC 2.0 Adhesives 3-pack
    TRIDOS.DESIGN
    €5.00 EUR
    Replacement TDC 2.0 arm with the longer Gen2 nut for the stock SSG24 hopup chamber
    TDC 2.0 Arm + Nut for SSG24 Gen2
    TRIDOS.DESIGN
    €10.00 EUR