SHIPPING WORLDWIDE FROM EU

tridos.design

124 products

Sort

New

Poor Man's StatTrak rubber patch with red 001337 digits styled like the Counter-Strike kill counter

Angled side view of the StatTrak kill counter patch showing its layered rubber relief

"Poor Man's StatTrak" Patch

14mm CCW to 16mm CW thread adapter highlighted on the barrel of a grayed-out handguard

Close-up of the thread adapter's 16mm CW male threads at the handguard muzzle end

MK23 suppressor marked 16CW threaded onto the adapter at the end of the handguard

CNC aluminum adapter showing its internal 14mm CCW threads and tightening hole

Black anodized thread adapter standing upright with the included o-ring beside it

14CCW to 16CW Thread Adapter

1913 stock adapter installed on an SSX23 pistol with a folding stock hinge attached

SSX23 pistol carbine with a skeletonized 1913 folding stock extended and a riser-mounted red dot

Rear angle of the Nano Carbine adapter on an SSX23, showing its vertical 1913 picatinny slots

Side view of the picatinny stock adapter fitted to an SSX23 rear with no stock attached

1913 - Picatinny Style Stock Adapter /Nano Carbine/

AAP-01 thumb rest kit with red knurled pad, angled arm, screw and threaded pin#color_red

Red aap01 thumb rest mounted on the trigger pin of an AAP-01 pistol#color_red

AAP-01 pistol with the red adjustable thumb rest and matching red parts installed#color_red

Two AAP-01 pistols showing the red thumb rest fitted on either side of the gun#color_red

Black aap01 thumb rest parts: knurled thumb pad, angled arm, screw and pin#color_black

Black adjustable thumb rest installed above the trigger of an AAP-01 pistol#color_black

Black AAP-01 pistol fitted with the adjustable thumb rest for a supported grip#color_black

Top view of two AAP-01 pistols with the black thumb rest on left and right side#color_black

Gray aap01 thumb rest kit with knurled pad, angled arm, screw and threaded pin#color_gray

Gray aluminum thumb rest mounted on the AAP-01 trigger pin, pad angled downward#color_gray

AAP-01 Adjustable Thumb Rest

Sold Out

aap-01 aftermarket trigger in red color#color_red

aap-01 aftermarket trigger in red color#color_red

aap-01 aftermarket trigger in red color#color_red

aap-01 aftermarket trigger in red color#color_red

aap-01 aftermarket trigger in black color#color_black

aap-01 aftermarket trigger in black color#color_black

aap-01 aftermarket trigger in black color#color_black

aap-01 aftermarket trigger in black color#color_black

Gray CNC aap01 trigger with two adjustment screws and included installation pin#color_gray

Side view of the gray adjustable trigger installed on an AAP-01 pistol#color_gray

AAP-01 Adjustable Trigger

Pair of red extended slide release buttons with serrated grip surface for the AAP-01#color_red

Red extended slide release installed on an AAP-01 pistol, straight side view#color_red

Angled view of the red aap01 slide release button on the pistol frame#color_red

Rear view of an AAP-01 with red slide release and red charging handle fitted#color_red

Two black extended slide release buttons for the AAP-01 shown up close#color_black

Black extended slide release fitted on an AAP-01 pistol frame, side view#color_black

Close-up of the black serrated slide release lever installed on an aap01#color_black

AAP-01 seen from the rear with the black slide release lever installed#color_black

Pair of gray aluminum slide release buttons with serrations for the AAP-01#color_gray

Gray extended slide release mounted on an AAP-01, straight side view#color_gray

AAP-01 Extended Slide Release

Black dust cover and hex screw that close the exposed hole in the AAP01 grip

Bottom of the AAP-01 grip showing the exposed hole with dust cover and screw ready to install

AAP-01 airsoft pistol viewed from below with the grip dust cover screwed in place

AAP-01 airsoft pistol lying flat with dust cover installed, seen from the open magwell

AAP-01 Grip Dust Cover

tool for installing aap-01 hammer

AAP01 hammer assembly tool attached to a steel hammer, viewed from the pivot end

AAP-01 steel hammer held in the black assembly tool, hammer hook facing forward

tool for installing aap-01 hammer in half assembled hammer box

cross section on how aap-01 hammer installation tool works

AAP-01 Hammer Assembly Tool

Sold Out

red AAP-01 cnc machined magazine release button with stronger spring#color_red

red AAP-01 cnc machined magazine release button side view#color_red

red AAP-01 cnc machined magazine release button#color_red

red AAP-01 cnc machined magazine release button from back side#color_red

installation of red AAP-01 cnc machined magazine release button with stronger spring#color_red

black AAP-01 cnc machined magazine release button with stronger spring#color_black

black AAP-01 cnc machined magazine release button side view#color_black

black AAP-01 cnc machined magazine release button#color_black

black AAP-01 cnc machined magazine release button from back side#color_black

installation of black AAP-01 cnc machined magazine release button with stronger spring#color_black

AAP-01 Mag Release with Spring Upgrade

AAP-01 fire selector kit: red external lever, black internal arm and spring plunger#color_red

Fingers rotating the red aap01 fire selector at the rear of the pistol#color_red

Rear view of an AAP-01 with the red mini fire selector switch centered#color_red

Top view showing single and full auto positions of the red selector switch#color_red

AAP-01 blow back unit opened to show the fire selector arm installed inside#color_red

Black aap01 selector switch kit with internal lever and spring-loaded plunger#color_black

Rotating the black mini external fire selector with two fingers#color_black

Straight rear view of the black fire selector switch on an AAP-01 pistol#color_black

Single and full auto selector positions shown on two AAP-01 receivers#color_black

Disassembled AAP-01 blow back unit revealing the black selector arm inside#color_black

AAP-01 Mini External Fire Selector

set of 4 different strength aap-01 nozzle return springs on a spring holder

disassembled aap-01 bolt with upgraded nozzle return spring

stronger nozzle return spring for aap-01 installed

AAP-01 Nozzle Return Spring Upgrade (Set of 4)

red parts for aap-01 universal open holster mount#color_red

Red AAP01 open universal holster mount installed above the trigger guard of an AAP-01 pistol#color_red

AAP-01 pistol with red holster mount fitted beside the black Novritsch Open Universal Holster#color_red

black parts for aap-01 universal open holster mount#color_black

Black AAP01 open universal holster mount installed above the trigger guard of an AAP-01 pistol#color_black

AAP-01 pistol with black holster mount fitted beside the Novritsch Open Universal Holster#color_black

gray parts for aap-01 universal open holster mount#color_gray

Gray AAP01 open universal holster mount installed above the trigger guard of an AAP-01 pistol#color_gray

AAP-01 pistol with gray holster mount fitted beside the Novritsch Open Universal Holster#color_gray

silver parts for aap-01 universal open holster mount#color_silver

AAP-01 Open Universal Holster Mount Gen2

set of 4 different strength aap-01 upgraded recoil springs on a spring holder

aap-01 stronger recoil spring set with one installed in aap-01 stock bolt

AAP-01 Recoil Spring Upgrade (Set of 4)

New

CNC machined auto sear for Action Army AAP-01 hammer assembly made from stainless steel

Close-up of the stainless steel AAP-01 auto sear, part 57, from the pivot ring side

AAP-01 Stainless Steel Auto Sear / Part 57

New

Six CNC stainless steel AAP01 hammer assembly parts arranged around the blue install jig

AAP-01 Stainless Steel Complete Hammer Set

New

Four CNC stainless steel AAP-01 hammer assembly parts: sear, valve knocker, rotor and auto sear

AAP-01 Stainless Steel Extra Hammer Bits / Upgrade Set

AAP-01 steel hammer and firing pin lock, CNC machined stainless steel, with blue installation jig

Installing the AAP-01 stainless steel hammer into the trigger box using the included installation jig

CNC steel hammer installed in an AAP-01 airsoft GBB pistol, replacement for a broken stock hammer

Stainless steel hammer and firing pin lock installed in an AAP-01C trigger assembly, close-up

AAP-01 hammer assembly with stainless steel hammer set installed, top view of the trigger unit

Stainless steel hammer resting inside the AAP01 trigger box, viewed from the rear of the frame

AAP-01 Stainless Steel Hammer and Firing Pin Lock / Starter Set

New

CNC machined rotor for Action Army AAP-01 hammer assembly made from stainless steel

Stainless steel rotor for the AAP01 hammer assembly, part 54, with its round pin facing up

Angled close-up of the CNC machined AAP-01 rotor, part 54, with the pin toward the camera

AAP-01 Stainless Steel Rotor / Part 54

New

CNC machined main sear for Action Army AAP-01 hammer assembly made from stainless steel

Stainless steel AAP-01 main sear, part 51, viewed from the pivot hole side

AAP-01 Stainless Steel Sear / Part 51

New

CNC machined valve knocker for Action Army AAP-01 hammer assembly made from stainless steel

Rear angle of the stainless steel AAP-01 valve knocker, part 53, showing the knocker hook

AAP-01 Stainless Steel Valve Knocker / Part 53

⚠ EARLY ACCESS

black cnc machined top rail for AAP-01 with tdc clicker#size_short

black cnc machined top rail mounted on aap-01 with a mounted red dot and access hole for TDC thumbscrew#size_short

Front angled view of an AAP-01 with the TDC clicker top rail, red dot and fibre optic front sight#size_short

Underside of the black CNC machined AAP01 top rail showing the TDC clicker unit#size_short

Render of the long AAP01 top rail version with extended picatinny slots for folding stock builds#size_long

AAP-01 Top Rail with TDC Clicker

~~€27.00~~ from €15.00

Black universal AAP01 TDC drill jig shaped like a hop up chamber with a 4.2 mm drill bit and screws

TDC drill jig installed inside an aftermarket AAP-01 upper with a power drill bit approaching

AAP-01 Universal Drill Jig for TDC

aap-01 with red upper lock button installed#color_red

aap-01 with red upper lock button installed#color_red

aap-01 with red upper lock button installed#color_red

black upper lock button for aap-01#color_black

aap-01 with black upper lock button installed#color_black

aap-01 with black upper lock button installed#color_black

aap-01 with black upper lock button installed#color_black

gray upper lock button for aap-01#color_gray

aap-01 with gray upper lock button installed#color_gray

AAP-01 Upper Lock Button

Sold Out

SSG96 airbrake pin protruding from the CNC modified piston head on the blue piston

Front view down the SSG96 airbrake piston assembly with the aluminum pin centered

Modified piston head removed from the blue SSG96 piston, showing the airbrake pin seat

Single aluminum airbrake pin standing next to the black Modify piston head for the SSG96

Airbrake kit contents: CNC piston head and five aluminum pins from 10 to 24 mm for the SSG96

Airbrake Kit for SSG96

1 2 3 … 6 Next

tridos.design