SHIPPING WORLDWIDE FROM EU

TRIDOS.DESIGN

Sort

Sold Out

Front of the SSG24 M4 magazine adapter showing the adjustable mag-well and textured angled grip

Airsoft M4 mag adapter installed on a scoped Novritsch SSG24 with a short M4 magazine inserted

Underside of the adapter with the BB retention mechanism that holds BBs during a reload

Side view of the M4 adapter's truss-braced feed tower and adjustable mag-well structure

M4 Magazine Adapter for SSG24 / MOD24

Mini picatinny riser highlighted on an SSX-23 Nano Carbine rail with a micro red dot on top

Angled close-up of the aluminum riser lifting a micro red dot above the picatinny rail

Rear three-quarter view of the skeletonized picatinny riser with a red dot installed

Standalone mini picatinny riser in black anodized aluminum with a four-slot rail on top

Underside of the picatinny rail riser showing the clamp face and two mounting screws

Mini Picatinny Riser

MP5 magazine seated in the ODIN MP5 adapter on top of an olive M12 speedloader

Hands cranking the ODIN M12 while filling an MP5 magazine through the speedloader adapter

ODIN M12 with the adapter fitted beside the straight and curved MP5 mags it was tested with

Front of the ODIN mp5 speedloader adapter installed, showing the red release latch up close

Underside of the black PA12 nylon MP5 adapter showing its red CNC aluminum latch

Front view of the adapter's BB retention opening with the red aluminum latch below

ODIN Adapter for MP5 Magazines

cross section view on ODIN speedloader with sound dampening silicone buffer and upgrade lid installed

top down view of ODIN m12 speedloader with upgraded lid installed

airsoft M4 magazine being unloaded in odin m12 speedloader through upgraded lid with mag dump nozzle

upgrade lid for odin M12 sidewinder speedloader with installed internal sound dampening silicone inlay

bottom view of odin m12 sidewinder lid upgrade part

ODIN M12 Speedloader Lid Upgrade

Red anodized aluminum ODIN M12 nozzle with its replaceable BB retention o-ring beside it

Face of the red aluminum nozzle showing the BB retention mechanism inside the bore

End view of an olive ODIN M12 speedloader with the red upgrade nozzle installed

ODIN speedloader upgrade nozzle seated in the loader, seen from the front at an angle

ODIN M12 Speedloader Nozzle Upgrade

Outer barrel extension linking the suppressor to a greyed-out Nano Carbine build

50mm, 100mm and 150mm CNC aluminum barrel extensions standing side by side

Muzzle end of the extension with the pre-installed O-ring that steadies the inner barrel

Knurled mounting end of the extension showing internal threads and two set screws

Black anodized aluminum outer barrel extension from knurled base to threaded tip for SSX23 / MK23

Nano Carbine with the 50mm extension, suppressor sitting close to the handguard

Nano Carbine with the 100mm extension moving the suppressor further forward

Nano Carbine with the longest 150mm extension for covering a 300mm inner barrel

Outer Barrel Extensions 16CW to 14CCW /Nano Carbine/

from €14.00 EUR

Picatinny side rail mounted on the slide stabilizer of a Nano Carbine build

Close-up of the aluminum side rail bolted to the stabilizer plate on an SSX23 build

Compact weapon light attached to the picatinny side rail beside the suppressor

Top view of the Nano Carbine with a flashlight fitted on the right-hand side rail

Side rail screwed to the riser block through its height adjustment slots

Picatinny side rail set contents: riser block, rail section and four mounting screws

Shooter's view down the slide with picatinny side rails mounted on both sides

Picatinny Side Rails /Nano Carbine/

Knurled aluminum protective cap installed on the regulator threads of a black HPA tank

Black 6061 aluminum HPA tank cap with grippy knurling and o-ring under the rim

Inside of the HPA tank protective cap showing the internal threads that shield the valve

Protective Cap for HPA Tank

Sold Out

Set of three A1, A2 and A3 safety dust covers for SSG10 stocks with the mounting screw

SSG10 bolt action receiver with a Flux trigger installed, showing the trigger area

Safety Dust Cover for Flux Trigger (Set of 3)

Short picatinny rail shown installed on the core mount of a grayed-out SSX-23 pistol

Angled view of the short rail mounted over the NANO core mount on an SSX23 slide

SSX23 Nano Carbine with a micro red dot on the short picatinny rail and silencer fitted

Close-up of a micro red dot clamped to the short rail above the Nano Carbine core mount

Standalone short picatinny rail in black anodized aluminum with four countersunk screws

Short Picatinny Rail /Nano Carbine/

Slide stabilizer plate linking the top rail to the frame grip of a Nano Carbine

Close-up of a CNC aluminum slide stabilizer bolted between long rail and frame rail

Stabilizer plate joining the top rail with the angled mag holder grip on an SSX23

Nano Carbine with slide stabilizers installed, red dot and weapon light mounted

Right-side stabilizer plate above the Olight PL-2 flashlight on the MK23 build

Pair of black aluminum slide stabilizer plates with slotted cutouts and screws

Slide Stabilizers /Nano Carbine/

Two spare 30mm titanium mesh protector discs with countersunk M2 screw holes for thermal devices

Spare 30mm Titanium Mesh Protector for Thermal Device (Set of 2)

Gen2 titanium spare screw for the AAP-01 Open Holster Mount with hex socket head

Side view of the AAP01 holster mount Gen2 titanium screw showing its threaded tip

Spare Screw for AAP-01 Open Holster Mount (Gen2 / Titanium)

Top view of the safety dust cover filling the safety switch slot on an SSG10 receiver

SSG10 bolt handle and safety dust cover installed where the safety switch was removed

A1 version of the SSG10 safety dust cover with its stock marking visible on the part

Overhead angle of the dust cover sealing the safety slot behind the SSG10 bolt

Safety dust cover fitted on a scoped SSG10 with the receiver markings in view

A2 version of the safety dust cover installed on the SSG10 trigger box, marking visible

Safety dust cover installed beside the bolt on an SSG10 A3 with a bubble level mounted

Scoped SSG10 A3 with skeletonized stock and the safety dust cover in place by the bolt

A3 version of the SSG10 safety dust cover shown close up on the trigger box

SSG10 Safety Dust Cover

New

Protective cover for SSG11 magazine release / eject button

Protective cover for SSG11 magazine release / eject button installed on the SSG11 replica

SSG11 Mag Release Protector

Black SSG24 mag unloader tool with spring-loaded release button and side magazine slot

Mag unloader screwed onto a Novritsch 0.43g BIO ammo bottle, ready to empty SSG24 magazines

Hand holding the ammo bottle while the unloader tool empties a translucent SSG24 magazine

SSG24 / SSG96 Mag Unloader

TRIDOS speedloader adapter fitted over the feed lips of a translucent SSG24 magazine

Adapter joining a speedloader to an SSG24 magazine so BBs feed straight into the mag

BB-filled speedloader with the adapter beside an SSG96 magazine holding back a retained BB

Black SSG96 speedloader adapter shown alone with its fixing screw and bb retention o-ring

SSG24 / SSG96 Speedloader Adapter

Sold Out

Airbrake pin protruding from the modified piston head on a gold SSG24 cylinder

SSG24 airbrake pin installed in the CNC modified Modify piston head, side view

Rear of the Gen2 airbrake piston head showing the internal seat the pin locks into

Gen2 SSG24 piston head beside a loose airbrake pin that now inserts from the inside

Five airbrake pins from 10 to 24 mm in a rack beside the SSG24 piston head

SSG24 Airbrake Kit Gen2

SSG24 bipod stud holder with the threaded stud sleeve seated in the printed plate

Bipod stud held in the correct position by the holder inside the SSG24 stock forend

Underside of the 3D printed holder plate keeping the SSG24 bipod stud aligned

Black bipod stud holder plate for the SSG24 shown on its own with the stud slot empty

SSG24 Bipod Stud Holder

Enlarged SSG24 bolt handle CNC machined from a single piece of black 7075 aluminum

Heavy bolt handle installed on an SSG24 airsoft sniper rifle below the scope, flipped down

Shooter's view over the rifle stock with the enlarged handle reaching out beside the scope

Matte black aluminum handle laid flat, showing the ring collar and knurled end knob

End-on close-up of the grooved knob that makes the SSG24 bolt handle easy to grab

Detail of the handle collar with the slot and shim holes that set flip-up tension

SSG24 bolt handle beside the two included plastic shims used to adjust flipping force

SSG24 Enlarged Bolt Handle

SSG24 safety dust cover plugged into the empty safety switch slot beside the bolt handle

Close-up of the gun dust cover seated on the SSG24 trigger box above the trigger

SSG24 Safety Dust Cover

SSG24 trigger guard with the black dust cover installed, closing the gap around the trigger

Angled view of the trigger dust cover fitted between trigger guard and trigger box on an SSG24

SSG24 metal trigger box and trigger shown from the side before the dust cover is installed

Standard and extended versions of the 3D printed SSG24 trigger dust cover side by side

SSG24 Trigger Dust Cover

Save €2.00 EUR

Pair of black 7075 aluminum SSG96 cheekrest thumbscrews with diamond knurled heads

View from the SSG96 buttpad along the stock with both cheekrest screws on the side

Fingers turning a knurled thumbscrew on the SSG96 stock for a tool-less spring change

Allen key seated in the hex socket of an SSG96 cheekrest thumbscrew for extra torque

SSG96 Cheekrest Thumbscrews

~~€10.00 EUR~~ €8.00 EUR

SSG96 front stud holder keeping the metal stud in place on the outer barrel

Front stud held upright by the black holder on an SSG96 outer barrel during assembly

Black 3D-printed front stud holder for the SSG96 shown on its own against white

SSG96 Front Stud Holder

Previous 1 2 3 4 5 6 Next

TRIDOS.DESIGN