Knurled aluminum cylinder nozzle wrench with the engraved Tridos logo on its face
Numbered pin face of the wrench next to a stainless sniper cylinder and its nozzle
Hand gripping the knurled wrench to unscrew a stainless airsoft cylinder head
Wrench face with width settings 1 to 6 and two steel pins installed at position 3
Side of the wrench body showing the leverage hole for a hex key or screwdriver
Knurled aluminum cylinder nozzle wrench with the engraved Tridos logo on its face
Numbered pin face of the wrench next to a stainless sniper cylinder and its nozzle
Hand gripping the knurled wrench to unscrew a stainless airsoft cylinder head
Wrench face with width settings 1 to 6 and two steel pins installed at position 3
Side of the wrench body showing the leverage hole for a hex key or screwdriver
TRIDOS.DESIGN

Universal Cylinder Nozzle Wrench

€12.00 EUR
/
Tax included. Shipping calculated at checkout.
  • Shipping worldwide from EU
  • In stock, ready to ship
  • Backordered, shipping soon

Pairs well with:
  • 1x wrench
  • 2x M2.5 pins (pre-installed)

Worldwide shipping starts at 7.90€ and is calculated during checkout based on location.

Orders are usually fulfilled in 1-2 business days and are shipped from our warehouse in Netherlands.

⚠ Duties may apply if you're based outside EU economic zone

MUST HAVE IN ANY SNIPER TECH'S TOOLBOX

This wrench is made out of anodized aluminum and has 6 different width settings for the 2.5mm size stainless steel pins. This makes it compatible with pretty much any cylinder head out there!

This cylinder nozzle wrench will fit any cylinder head with:

  • hole size of 3mm or bigger
  • center distance between holes from 11.8mm to 17.1mm

The wrench also has a hole on the side which takes a hex key or small screwdriver for extra leverage or adding some paracord for organizing purposes. To relocate the pins, you will need a pretty small flat head screw driver or you can use a knife blade.

Common platform settings (wrench comes pre-installed at #3):

  • #3 - SSG10 / SSG24 / SSG96
  • #4 - SSG11
  • #1 - SSG96 (older batches)

Customers praised this tool as "super adjustable for different cylinder heads" with excellent build quality. The wrench eliminates the need for pliers or tweezers, making cylinder maintenance much easier. Shoppers noted it "does not leave any heavy dent marks" and provides good grip. One minor issue mentioned: pins are difficult to adjust without an appropriately thin screwdriver.

  • 5 stars: 12 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
R
Romnie (Ontario, Canada)
Good Quality

Good Quality. Easy to use, you don't have to use fliers that will scratch or damage you cylinder.

G
George M. (England, United Kingdom)
Super convenient

Really nicely machined part, super adjustable for different cylinder heads, cracking little tool, I can highly recommend it.

D
Daz (Hesse, Germany)
Great cylinder tool

Great little tool for tightening & untightening different makes of cylinder head, the only improvement I would make is a double flat edge groove on the opposite side for those cylinders without holes.

J
Janos H. (North Rhine-Westphalia, Germany)

Smart little tool! No more fiddling with tweezers and pliers :)

V
V.S. (Bavaria, Germany)
Has a small Caveat but still Love it.

The Wrench beats the problam that you have to jam a pair of liers into your Piston. the Wrench ist nicely bult and feels nice the only thing i can say is negative ist the changing of the pins. There are slits for a screwdriver but my entire Airsoft Workshop has no Screwdriver that is thin enouch to get in there. so grab it softly with Pliers or try to screw it loose with your Fingers, just don't loose them they are pretty tiny. Would love to have the ability to buy these screws/pins as a Spare Part. Other than that.. I love it.

Excuse my grammar. English is not my native Language.

G
Giuseppe A. (Brussels Capital, Belgium)
Cylinder Nozzle Wrench

hey Mikus, a very good piece of equipment, I should have bought this a long time ago. this is great

R
Ralf🇩🇪 (Hesse, Germany)
Super Werkzeug

Erleichert das auf- und zuschrauben ungemein.
Top!!!

R
Roger R.S.G. (Santa Ana Department, El Salvador)
Excellent tool !!!

Excellent tool... it is the tool that all of us who have sniper rifles should have, it really makes the job easier and takes care of the cylindrical nozzle when removing it.

A
Alex o.P.
One tool to open all

Works very well; opens many cylinder head sizes (specially to my custom made cylinders...)
Also, it does not leave any heavy dent marks vs other tools (in my case, circlip pliers).

I also like the wide knurl in surface, as it provides me better grip with my oily hands.
The through hole is also can be used for long screw driver or metal rod to make torque for cylinders that are hard to open
or needed to be tightly closed.

Another great must-have item to your tools.

C
Camilo V.
Muy útil

Ayuda bastante para hacerle mantenimientos a la réplica, y manipular el cilindro

P
Patrik
The only one you'll ever need!

This thing will outlast you. The build quality is perfect. Makes removing the cylinder nozzle a breeze.

N
Niklaus K.
Much needed & propably the best tool for the job!

An absolute must have for oversized springs like the RAPAX HULK, or when using fps adjuster rings!
Does a perfect job and so much easier than anything else i have tried.
And it is the most beautiful of all out there!
It is heavy and the second you hold it in your hand you know it's gonna last you for ever!
Thank you, Mikus!

You may also like