CQB Build /Nano Carbine/


Clear corners like a boss with a folding stock and full length top rail. Angled Spare Mag Holder allows for lightning quick reloads and incredible ergonomics.

    12 products

    ARES Amoeba folding stock highlighted in profile on a grayed-out SSX-23 pistol build
    SSX23 Nano Carbine with the ARES folding stock deployed and a micro red dot mounted
    Rear view of the Nano Carbine with the ARES folding stock folded off to the right side
    Close-up of the ARES folding stock hinge locked onto the Nano Carbine stock adapter
    Ribbed rubber buttpad of the ARES Amoeba stock shown extended on an SSX23 build
    Standalone ARES Amoeba folding stock showing the skeleton frame and mount screw
    ARES Folding Stock
    AMOEBA
    €32.00
    Folding stock adapter highlighted between the SSX-23 frame and the folded stock hinge
    Close-up of the Nano Carbine stock adapter installed with the ARES hinge attached
    Side view of the folding stock adapter joining the ARES stock to an SSX23 Nano Carbine
    Fixing the stock adapter to the Nano Carbine with its single screw and a screwdriver
    Front socket of the PA12 nylon stock adapter showing the lattice core and embedded nut
    Standalone matte black folding stock adapter v1.0 beside a laser engraved steel plate
    Folding Stock Adapter /Nano Carbine/
    TRIDOS.DESIGN
    €25.00
    Now for TM
    Nano Carbine core mount highlighted on the slide of a Novritsch SSX-23 airsoft pistol
    Top angled view of the core mount installed on an SSX23 with rail mounting holes exposed
    Close-up of the core mount on an SSX23 slide with the red fiber optic sights left exposed
    Shooter's view down the exposed iron sights of an SSX23 fitted with the Nano core mount
    Rear three-quarter view of an SSX23 Nano Carbine with core mount and folding stock fitted
    Standalone CNC aluminum core mount with NANO engraving and its four mounting screws
    MK23 carbine kit contents: core mount, drill jig, drill bit and screws for plastic slides
    Core Mount /Nano Carbine/
    TRIDOS.DESIGN
    €20.00
    Long picatinny rail mounted on the slide of an SSX23 airsoft pistol, side profile view
    Angled view of a Nano Carbine build with the carbine picatinny rail, stock and suppressor
    Rear of the long picatinny rail riser bridging the slide, front mounting holes visible
    Hex key threading the front mounting screws through the rail into the SSX23 slide
    Rifle scope mounted on the full-length picatinny rail of the Nano Carbine
    Complete Nano Carbine with flashlight, red dot and suppressor built on the long rail
    Long picatinny rail kit with 3D printed drill jig, drill bit and mounting screws
    Long Picatinny Rail /Nano Carbine/
    TRIDOS.DESIGN
    €32.00
    Slide stabilizer plate linking the top rail to the frame grip of a Nano Carbine
    Close-up of a CNC aluminum slide stabilizer bolted between long rail and frame rail
    Stabilizer plate joining the top rail with the angled mag holder grip on an SSX23
    Nano Carbine with slide stabilizers installed, red dot and weapon light mounted
    Right-side stabilizer plate above the Olight PL-2 flashlight on the MK23 build
    Pair of black aluminum slide stabilizer plates with slotted cutouts and screws
    Slide Stabilizers /Nano Carbine/
    TRIDOS.DESIGN
    €16.00
    Now for TM
    Angled spare mag holder mounted on the SSX23 frame with a spare magazine inserted
    Nano Carbine with the angled magazine holder used as a foregrip, red dot above
    Close-up of the textured angled mag holder gripping a spare SSX23 magazine
    Rear view showing the stabilizer bracket above the spare magazine holder
    Grip texture detail of the mag holder serving as an angled front grip on the build
    Standalone angled spare mag holder in black nylon with tension screw and hex key
    Angled Spare Mag Holder /Nano Carbine/
    TRIDOS.DESIGN
    €60.00
    Mini picatinny riser highlighted on an SSX-23 Nano Carbine rail with a micro red dot on top
    Angled close-up of the aluminum riser lifting a micro red dot above the picatinny rail
    Side profile of an airsoft pistol carbine with the mini riser and red dot sight mounted
    Rear three-quarter view of the skeletonized picatinny riser with a red dot installed
    Standalone mini picatinny riser in black anodized aluminum with a four-slot rail on top
    Opposite angle of the riser showing the angled skeleton cutouts and rail tooth profile
    Underside of the picatinny rail riser showing the clamp face and two mounting screws
    Mini Picatinny Riser
    TRIDOS.DESIGN
    €10.00
    Set of 3 different strength hammer springs for SSX23 / MK23 platform
    Hammer spring installed inside SSX23 trigger assembly
    SSX23 hammer assembly with stronger aftermarket hammer spring
    View from the bottom of SSX23 / MK23 hammer assembly with strong aftermarket hammer spring installed inside.
    Stronger SSX23 / MK23 Hammer Springs (set of 3)
    TRIDOS.DESIGN
    €12.00
    Knurled mini TDC thumbscrew with laser etched adjustment arrows and short M4 thread
    Mini TDC thumbscrew installed on the hop-up cover of an airsoft pistol, seen from the side
    Rear view of an SSX23 pistol on a stand with the thumbscrew fitted to its TDC cover
    Sight picture over the SSX23 showing red and green fiber optics clear of the screw
    SSX23 with extended magazine lying flat, the low thumbscrew mounted on its TDC cover
    Side profile showing how little the low profile thumbscrew rises above the pistol slide
    Thumbscrew fitted in the SSX303 hop-up window beside the engraved HOP UP arrow
    Anodized aluminum thumbscrew from below, showing the knurled edge and M4 thread
    SSX23 / MK23 Mini TDC Thumbscrew
    TRIDOS.DESIGN
    €10.00
    CNC machined SSX23 hop arm showing the enlarged concave contact nub
    Hop arm installed in the MK23 hop up chamber with the bucking visible inside
    Straight view into the SSX23 hop-up chamber with the CNC arm seated over the bucking
    Angled view of the SSX23 aluminum hop arm with its rounded nub and side tabs
    Side profile of the SSX23 CNC hop arm showing the increased height of the nub
    End-on view of the MK23 hop arm's concave nub between the machined side tabs
    Underside of the MK23 CNC hop arm showing the flat plate and pivot notches
    SSX23 / MK23 CNC Hop Arm
    TRIDOS.DESIGN
    €10.00
    Long picatinny rail mounted on the slide of an SSX23 airsoft pistol, side profile view
    Angled view of a Nano Carbine build with the carbine picatinny rail, stock and suppressor
    Rear of the long picatinny rail riser bridging the slide, front mounting holes visible
    Hex key threading the front mounting screws through the rail into the SSX23 slide
    Rifle scope mounted on the full-length picatinny rail of the Nano Carbine
    Complete Nano Carbine with flashlight, red dot and suppressor built on the long rail
    Long picatinny rail kit with 3D printed drill jig, drill bit and mounting screws
    B-Stock: Long Picatinny Rail /Nano Carbine/
    TRIDOS.DESIGN
    €32.00
    Picatinny side rail mounted on the slide stabilizer of a Nano Carbine build
    Close-up of the aluminum side rail bolted to the stabilizer plate on an SSX23 build
    Compact weapon light attached to the picatinny side rail beside the suppressor
    Top view of the Nano Carbine with a flashlight fitted on the right-hand side rail
    Side rail screwed to the riser block through its height adjustment slots
    Picatinny side rail set contents: riser block, rail section and four mounting screws
    Shooter's view down the slide with picatinny side rails mounted on both sides
    Picatinny Side Rails /Nano Carbine/
    TRIDOS.DESIGN
    €8.00