SHIPPING WORLDWIDE FROM EU

NANO CARBINE KIT

100% modular, top of the line carbine kit for the SSX23.

36 products

Sort

Now for TM

Angled spare mag holder mounted on the SSX23 frame with a spare magazine inserted

Nano Carbine with the angled magazine holder used as a foregrip, red dot above

Close-up of the textured angled mag holder gripping a spare SSX23 magazine

Rear view showing the stabilizer bracket above the spare magazine holder

Grip texture detail of the mag holder serving as an angled front grip on the build

Standalone angled spare mag holder in black nylon with tension screw and hex key

Angled Spare Mag Holder /Nano Carbine/

Aluminum M-LOK handguard for the Nano Carbine highlighted on a greyed-out build

Handguard on a complete SSX23 Nano Carbine with scope and enclosed suppressor

MK23 carbine handguard with a long suppressor mounted, seen from the front quarter

Front of the handguard showing the aluminum barrel stabilizer insert and slots

Standalone handguard with M-LOK slots on all faces, including the 45 degree sides

PA12 nylon connecting piece at the rear of the handguard with mounting plates

Short Picatinny rail section fitted at the connector end of the M-LOK handguard

Handguard kit parts: nylon connector, screws and the aluminum stabilizer ring

M-LOK Handguard /Nano Carbine/

APS RS3 stock mounted on a buffer tube, shown against a greyed-out Nano Carbine

RS3 stock fitted on a complete SSX23 Nano Carbine with scope and suppressor

Looking into the stock's buffer tube channel with anti-wobble velcro strips inside

Lightweight polymer APS stock with the pre-cut velcro strips laid out beside it

Angled view of a Nano Carbine build with the carbine picatinny rail, stock and suppressor

Rear of the long picatinny rail riser bridging the slide, front mounting holes visible

Hex key threading the front mounting screws through the rail into the SSX23 slide

Rifle scope mounted on the full-length picatinny rail of the Nano Carbine

Complete Nano Carbine with flashlight, red dot and suppressor built on the long rail

Long picatinny rail kit with 3D printed drill jig, drill bit and mounting screws

Long Picatinny Rail /Nano Carbine/

Now for TM

Nano Carbine core mount highlighted on the slide of a Novritsch SSX-23 airsoft pistol

Top angled view of the core mount installed on an SSX23 with rail mounting holes exposed

Close-up of the core mount on an SSX23 slide with the red fiber optic sights left exposed

Shooter's view down the exposed iron sights of an SSX23 fitted with the Nano core mount

Rear three-quarter view of an SSX23 Nano Carbine with core mount and folding stock fitted

Standalone CNC aluminum core mount with NANO engraving and its four mounting screws

MK23 carbine kit contents: core mount, drill jig, drill bit and screws for plastic slides

Core Mount /Nano Carbine/

Folding stock adapter highlighted between the SSX-23 frame and the folded stock hinge

Close-up of the Nano Carbine stock adapter installed with the ARES hinge attached

Side view of the folding stock adapter joining the ARES stock to an SSX23 Nano Carbine

Fixing the stock adapter to the Nano Carbine with its single screw and a screwdriver

Front socket of the PA12 nylon stock adapter showing the lattice core and embedded nut

Standalone matte black folding stock adapter v1.0 beside a laser engraved steel plate

Folding Stock Adapter /Nano Carbine/

SSX23 Nano Carbine with the ARES folding stock deployed and a micro red dot mounted

Rear view of the Nano Carbine with the ARES folding stock folded off to the right side

Close-up of the ARES folding stock hinge locked onto the Nano Carbine stock adapter

Ribbed rubber buttpad of the ARES Amoeba stock shown extended on an SSX23 build

Standalone ARES Amoeba folding stock showing the skeleton frame and mount screw

ARES Folding Stock

Buffer tube adapter installed on a greyed-out SSX23 pistol via the Core Mount

M4 buffer tube with numbered stock positions mounted on an SSX23 Nano Carbine

PA12 nylon adapter with pre-installed APS buffer tube, seen from the mounting end

Underside of the metal buffer tube showing the stock adjustment slots and open end

Buffer Tube + Adapter /Nano Carbine/

1913 stock adapter installed on an SSX23 pistol with a folding stock hinge attached

SSX23 pistol carbine with a skeletonized 1913 folding stock extended and a riser-mounted red dot

Rear angle of the Nano Carbine adapter on an SSX23, showing its vertical 1913 picatinny slots

Side view of the picatinny stock adapter fitted to an SSX23 rear with no stock attached

1913 - Picatinny Style Stock Adapter /Nano Carbine/

SS-8R mini folding stock unfolded on an airsoft pistol, skeletonized metal frame with textured butt pad

Folding gun stock mounted on an SSX23 Nano Carbine with a red dot sight on top

Top view comparing the SS-8R stock folded to the left and to the right side

Folding stock folded flat alongside the receiver of a black airsoft carbine

Close-up of the 1913 Picatinny hinge and QD sling socket on the SS-8R stock

SS-8R mini folding stock extended on an SSQ22 airsoft rifle with a Victoptics scope

Angled view of an SSQ22 build with the folding rifle stock attached behind the grip

SS-8R Mini Folding Stock

Short picatinny rail shown installed on the core mount of a grayed-out SSX-23 pistol

Angled view of the short rail mounted over the NANO core mount on an SSX23 slide

SSX23 Nano Carbine with a micro red dot on the short picatinny rail and silencer fitted

Close-up of a micro red dot clamped to the short rail above the Nano Carbine core mount

Standalone short picatinny rail in black anodized aluminum with four countersunk screws

Short Picatinny Rail /Nano Carbine/

Angled view of a Nano Carbine build with the carbine picatinny rail, stock and suppressor

Rear of the long picatinny rail riser bridging the slide, front mounting holes visible

Hex key threading the front mounting screws through the rail into the SSX23 slide

Rifle scope mounted on the full-length picatinny rail of the Nano Carbine

Complete Nano Carbine with flashlight, red dot and suppressor built on the long rail

Long picatinny rail kit with 3D printed drill jig, drill bit and mounting screws

B-Stock: Long Picatinny Rail /Nano Carbine/

Now for TM

MK23 rail adapter mounted on the pistol frame below the slide, suppressor fitted

Close-up of the nylon frame rail on an SSX23 showing the short picatinny section

TRIDOS frame rail with a slide stabilizer plate attached on a Nano Carbine build

Front view of the build with red dot, flashlight and mk23 picatinny rail adapter

Finished Nano Carbine with an Olight flashlight mounted via the frame picatinny rail

Standalone MK23 frame rail in matte black PA12 nylon with the included hex key

SSX23 / MK23 Frame Rail /Nano Carbine/

Slide stabilizer plate linking the top rail to the frame grip of a Nano Carbine

Close-up of a CNC aluminum slide stabilizer bolted between long rail and frame rail

Stabilizer plate joining the top rail with the angled mag holder grip on an SSX23

Nano Carbine with slide stabilizers installed, red dot and weapon light mounted

Right-side stabilizer plate above the Olight PL-2 flashlight on the MK23 build

Pair of black aluminum slide stabilizer plates with slotted cutouts and screws

Slide Stabilizers /Nano Carbine/

Outer barrel extension linking the suppressor to a greyed-out Nano Carbine build

50mm, 100mm and 150mm CNC aluminum barrel extensions standing side by side

Muzzle end of the extension with the pre-installed O-ring that steadies the inner barrel

Knurled mounting end of the extension showing internal threads and two set screws

Black anodized aluminum outer barrel extension from knurled base to threaded tip for SSX23 / MK23

Nano Carbine with the 50mm extension, suppressor sitting close to the handguard

Nano Carbine with the 100mm extension moving the suppressor further forward

Nano Carbine with the longest 150mm extension for covering a 300mm inner barrel

Outer Barrel Extensions 16CW to 14CCW /Nano Carbine/

Picatinny side rail mounted on the slide stabilizer of a Nano Carbine build

Close-up of the aluminum side rail bolted to the stabilizer plate on an SSX23 build

Compact weapon light attached to the picatinny side rail beside the suppressor

Top view of the Nano Carbine with a flashlight fitted on the right-hand side rail

Side rail screwed to the riser block through its height adjustment slots

Picatinny side rail set contents: riser block, rail section and four mounting screws

Shooter's view down the slide with picatinny side rails mounted on both sides

Picatinny Side Rails /Nano Carbine/

14mm CCW to 16mm CW thread adapter highlighted on the barrel of a grayed-out handguard

Close-up of the thread adapter's 16mm CW male threads at the handguard muzzle end

MK23 suppressor marked 16CW threaded onto the adapter at the end of the handguard

CNC aluminum adapter showing its internal 14mm CCW threads and tightening hole

Black anodized thread adapter standing upright with the included o-ring beside it

14CCW to 16CW Thread Adapter

Sold Out

6.03mm, 300mm inner barrel for VSR10 made by Modify Tech

modify SSX inner barrel hopup window cutout closeup

side view of hopup window cutout for modify tech ssx inner barrel for VSR10

tip of the barrel from modify tech ssx inner barrel for vsr10

Modify 300mm, 6.03 Inner Barrel for VSR-10

Knurled mini TDC thumbscrew with laser etched adjustment arrows and short M4 thread

Mini TDC thumbscrew installed on the hop-up cover of an airsoft pistol, seen from the side

Rear view of an SSX23 pistol on a stand with the thumbscrew fitted to its TDC cover

Sight picture over the SSX23 showing red and green fiber optics clear of the screw

SSX23 with extended magazine lying flat, the low thumbscrew mounted on its TDC cover

Thumbscrew fitted in the SSX303 hop-up window beside the engraved HOP UP arrow

Anodized aluminum thumbscrew from below, showing the knurled edge and M4 thread

SSX23 / MK23 Mini TDC Thumbscrew

CNC machined SSX23 hop arm showing the enlarged concave contact nub

Hop arm installed in the MK23 hop up chamber with the bucking visible inside

Straight view into the SSX23 hop-up chamber with the CNC arm seated over the bucking

Angled view of the SSX23 aluminum hop arm with its rounded nub and side tabs

End-on view of the MK23 hop arm's concave nub between the machined side tabs

Underside of the MK23 CNC hop arm showing the flat plate and pivot notches

SSX23 / MK23 CNC Hop Arm

Set of 3 different strength hammer springs for SSX23 / MK23 platform

Hammer spring installed inside SSX23 trigger assembly

SSX23 hammer assembly with stronger aftermarket hammer spring

View from the bottom of SSX23 / MK23 hammer assembly with strong aftermarket hammer spring installed inside.

Stronger SSX23 / MK23 Hammer Springs (set of 3)

Gold coated nozzle springs for the SSX23 / MK23, one long and one on a threaded guide

Long gold coated spring fitted along the channel of the SSX23 loading nozzle assembly

Underside of the nozzle assembly showing the short gold spring seated in its channel

SSX23 / MK23 Nozzle Spring Upgrade

Stubby vertical grip installed on the picatinny rail of a Nano Carbine airsoft pistol

Close-up of the textured stubby grip on a pistol carbine fitted with a weapon light and suppressor

Low front angle of the vertical foregrip under a carbine with flashlight, red dot and folding stock

Side view of the stubby picatinny vertical grip clamped under the Nano carbine's bottom rail

Textured polymer stubby grip on its own, showing the picatinny clamp and locking screw

Rear angle of the stubby vertical grip showing its picatinny slot and single screw clamp

Stubby Vertical Grip

Mini picatinny riser highlighted on an SSX-23 Nano Carbine rail with a micro red dot on top

Angled close-up of the aluminum riser lifting a micro red dot above the picatinny rail

Rear three-quarter view of the skeletonized picatinny riser with a red dot installed

Standalone mini picatinny riser in black anodized aluminum with a four-slot rail on top

Underside of the picatinny rail riser showing the clamp face and two mounting screws

Mini Picatinny Riser

1 2 Next

Nano Carbine Kit — MK23 & SSX23 Carbine Conversion