SHIPPING WORLDWIDE FROM EU

Black Friday / -30%

Sort

Black 1.5 inch high red dot mount standing alone, showing its skeletonized riser design

Victoptics red dot sitting on the tall riser mount, clamped to a rifle's top rail

Shooter's eye view through a red dot raised 1.5 inches over the picatinny rail

Red dot with honeycomb filter on the 1.5 inch mount, seen from the front quarter

Top plate and picatinny clamp of the red dot riser with its two mounting screws

Top face of the high mount showing screw holes, recoil stop and lightening slots

1.5" High Red Dot Mount

Sold Out

aap-01 folding stock as it comes in the box

aap-01 folding stock in folded position from side

aap-01 folding stock from bottom back with QD attachment point visible

aap-01 folding stock in locked position vs AAP-01 folding stock in fully extended position

AAP-01 Folding Stock

Black dust cover and hex screw that close the exposed hole in the AAP01 grip

Bottom of the AAP-01 grip showing the exposed hole with dust cover and screw ready to install

AAP-01 airsoft pistol viewed from below with the grip dust cover screwed in place

AAP-01 airsoft pistol lying flat with dust cover installed, seen from the open magwell

AAP-01 Grip Dust Cover

tool for installing aap-01 hammer

AAP01 hammer assembly tool attached to a steel hammer, viewed from the pivot end

AAP-01 steel hammer held in the black assembly tool, hammer hook facing forward

tool for installing aap-01 hammer in half assembled hammer box

cross section on how aap-01 hammer installation tool works

AAP-01 Hammer Assembly Tool

set of 4 different strength aap-01 nozzle return springs on a spring holder

disassembled aap-01 bolt with upgraded nozzle return spring

stronger nozzle return spring for aap-01 installed

AAP-01 Nozzle Return Spring Upgrade (Set of 4)

red parts for aap-01 universal open holster mount#color_red

Red AAP01 open universal holster mount installed above the trigger guard of an AAP-01 pistol#color_red

AAP-01 pistol with red holster mount fitted beside the black Novritsch Open Universal Holster#color_red

black parts for aap-01 universal open holster mount#color_black

Black AAP01 open universal holster mount installed above the trigger guard of an AAP-01 pistol#color_black

AAP-01 pistol with black holster mount fitted beside the Novritsch Open Universal Holster#color_black

gray parts for aap-01 universal open holster mount#color_gray

Gray AAP01 open universal holster mount installed above the trigger guard of an AAP-01 pistol#color_gray

AAP-01 pistol with gray holster mount fitted beside the Novritsch Open Universal Holster#color_gray

silver parts for aap-01 universal open holster mount#color_silver

AAP-01 Open Universal Holster Mount Gen2

set of 4 different strength aap-01 upgraded recoil springs on a spring holder

aap-01 stronger recoil spring set with one installed in aap-01 stock bolt

AAP-01 Recoil Spring Upgrade (Set of 4)

B-Stock

AAP-01 steel hammer and firing pin lock, CNC machined stainless steel, with blue installation jig

Installing the AAP-01 stainless steel hammer into the trigger box using the included installation jig

CNC steel hammer installed in an AAP-01 airsoft GBB pistol, replacement for a broken stock hammer

Stainless steel hammer and firing pin lock installed in an AAP-01C trigger assembly, close-up

AAP-01 hammer assembly with stainless steel hammer set installed, top view of the trigger unit

Stainless steel hammer resting inside the AAP01 trigger box, viewed from the rear of the frame

AAP-01 Stainless Steel Hammer and Firing Pin Lock (B-Stock)

~~€25.00 EUR~~ €15.00 EUR

AAP-01 steel hammer and firing pin lock, CNC machined stainless steel, with blue installation jig

Installing the AAP-01 stainless steel hammer into the trigger box using the included installation jig

CNC steel hammer installed in an AAP-01 airsoft GBB pistol, replacement for a broken stock hammer

Stainless steel hammer and firing pin lock installed in an AAP-01C trigger assembly, close-up

AAP-01 hammer assembly with stainless steel hammer set installed, top view of the trigger unit

Stainless steel hammer resting inside the AAP01 trigger box, viewed from the rear of the frame

AAP-01 Stainless Steel Hammer and Firing Pin Lock / Starter Set

aap-01 with red upper lock button installed#color_red

aap-01 with red upper lock button installed#color_red

aap-01 with red upper lock button installed#color_red

black upper lock button for aap-01#color_black

aap-01 with black upper lock button installed#color_black

aap-01 with black upper lock button installed#color_black

aap-01 with black upper lock button installed#color_black

gray upper lock button for aap-01#color_gray

aap-01 with gray upper lock button installed#color_gray

AAP-01 Upper Lock Button

Allen key holder kit for HPA regulators with hex key, foam clip and mounting cable ties

Hex key holder mounted on an HPA tank regulator, allen key clipped beside the gauge

Novritsch HPA regulator with the allen key held vertically by the slim key holder

Curved nylon hex key holder clip showing its adhesive backing before mounting

Allen / Hex Key Holder for HPA Regulator

Angled view of a Nano Carbine build with the carbine picatinny rail, stock and suppressor

Rear of the long picatinny rail riser bridging the slide, front mounting holes visible

Hex key threading the front mounting screws through the rail into the SSX23 slide

Rifle scope mounted on the full-length picatinny rail of the Nano Carbine

Complete Nano Carbine with flashlight, red dot and suppressor built on the long rail

Long picatinny rail kit with 3D printed drill jig, drill bit and mounting screws

B-Stock: Long Picatinny Rail /Nano Carbine/

Baofeng UV-5R PTT guard kit: nylon PTT cover, knurled aluminum volume knob and rubber band

PTT button protector installed on a Baofeng UV-5R with the belt clip screws, buttons recessed but usable

Baofeng UV-5R with PTT guard, aluminum volume knob and rubber band installed, front view

PTT guard prevents hot-micing on a Baofeng UV-5R; rubber band secures the airsoft comms cable plug

Knurled aluminum volume knob upgrade with o-ring on a Baofeng UV-5R prevents accidental volume changes

Baofeng UV-5R with upgraded volume dial with an o-ring that adds extra friction. Dial is removed to show the o-ring groove and volume dial potentiometer shaft.

Baofeng PTT Guard + Volume Dial for UV-5R

New

PTT guard and volume dial kit for Baofeng UV-5RM / UV-5RH

Baofeng UV-5RM radio with PTT guard installed

UV-5RM radio with PTT blocker installed and volume dial upgrade

Baofeng UV-5RM with PTT guard installed and volume dial with o-ring

Baofeng UV-5RM with PTT blocker installed and volume dial with o-ring

Baofeng UV-5RM with PTT guard installed and an external PTT cable plugged in securely covered with a ranger band

Baofeng UV-5RM with volume dial o-ring mod upgrade

Aluminum volume knob with o-ring mod for the UV-5RM, removed and next to the bare shaft of the radio

Baofeng PTT Guard + Volume Dial for UV-5RM / UV-5RH

New

PTT guard kit and o-ring mod for Baofeng UV-82

Baofeng UV-82 with PTT guard installed to prevent hotmic

Baofeng UV-82 with PTT guard installed to prevent hotmic

Baofeng UV-82 with PTT guard installed with external PTT plugged in

Baofeng UV-82 with aluminum volume dial with o-ring mod installed

Knurled aluminum volume knob removed from the Baofeng UV-82, showing the o-ring friction mod

Baofeng PTT Guard + Volume Dial for UV-82

Buffer tube adapter installed on a greyed-out SSX23 pistol via the Core Mount

M4 buffer tube with numbered stock positions mounted on an SSX23 Nano Carbine

PA12 nylon adapter with pre-installed APS buffer tube, seen from the mounting end

Underside of the metal buffer tube showing the stock adjustment slots and open end

Buffer Tube + Adapter /Nano Carbine/

Now for TM

Nano Carbine core mount highlighted on the slide of a Novritsch SSX-23 airsoft pistol

Top angled view of the core mount installed on an SSX23 with rail mounting holes exposed

Close-up of the core mount on an SSX23 slide with the red fiber optic sights left exposed

Shooter's view down the exposed iron sights of an SSX23 fitted with the Nano core mount

Rear three-quarter view of an SSX23 Nano Carbine with core mount and folding stock fitted

Standalone CNC aluminum core mount with NANO engraving and its four mounting screws

MK23 carbine kit contents: core mount, drill jig, drill bit and screws for plastic slides

Core Mount /Nano Carbine/

Angled view of a Nano Carbine build with the carbine picatinny rail, stock and suppressor

Rear of the long picatinny rail riser bridging the slide, front mounting holes visible

Hex key threading the front mounting screws through the rail into the SSX23 slide

Rifle scope mounted on the full-length picatinny rail of the Nano Carbine

Complete Nano Carbine with flashlight, red dot and suppressor built on the long rail

Long picatinny rail kit with 3D printed drill jig, drill bit and mounting screws

Long Picatinny Rail /Nano Carbine/

M4 Adapter for SSG10 / VSR10

Sold Out

Front of the SSG24 M4 magazine adapter showing the adjustable mag-well and textured angled grip

Airsoft M4 mag adapter installed on a scoped Novritsch SSG24 with a short M4 magazine inserted

Underside of the adapter with the BB retention mechanism that holds BBs during a reload

Side view of the M4 adapter's truss-braced feed tower and adjustable mag-well structure

M4 Magazine Adapter for SSG24 / MOD24

cross section view on ODIN speedloader with sound dampening silicone buffer and upgrade lid installed

top down view of ODIN m12 speedloader with upgraded lid installed

airsoft M4 magazine being unloaded in odin m12 speedloader through upgraded lid with mag dump nozzle

upgrade lid for odin M12 sidewinder speedloader with installed internal sound dampening silicone inlay

bottom view of odin m12 sidewinder lid upgrade part

ODIN M12 Speedloader Lid Upgrade

Outer barrel extension linking the suppressor to a greyed-out Nano Carbine build

50mm, 100mm and 150mm CNC aluminum barrel extensions standing side by side

Muzzle end of the extension with the pre-installed O-ring that steadies the inner barrel

Knurled mounting end of the extension showing internal threads and two set screws

Black anodized aluminum outer barrel extension from knurled base to threaded tip for SSX23 / MK23

Nano Carbine with the 50mm extension, suppressor sitting close to the handguard

Nano Carbine with the 100mm extension moving the suppressor further forward

Nano Carbine with the longest 150mm extension for covering a 300mm inner barrel

Outer Barrel Extensions 16CW to 14CCW /Nano Carbine/

from €14.00 EUR

Picatinny side rail mounted on the slide stabilizer of a Nano Carbine build

Close-up of the aluminum side rail bolted to the stabilizer plate on an SSX23 build

Compact weapon light attached to the picatinny side rail beside the suppressor

Top view of the Nano Carbine with a flashlight fitted on the right-hand side rail

Side rail screwed to the riser block through its height adjustment slots

Picatinny side rail set contents: riser block, rail section and four mounting screws

Shooter's view down the slide with picatinny side rails mounted on both sides

Picatinny Side Rails /Nano Carbine/

Orange Modify Predator bucking installed on a bridgeless SSG24 inner barrel

View inside the orange Predator bucking showing the enlarged contact mound

Three Modify Predator hop up bucking packs in different hardnesses with inner barrel

Yellow Predator bucking for the SSG24 beside the unbridged barrel hop window

Purple Predator bucking next to the SSG24 barrel hop window cutout

Orange Predator bucking laid beside the bridge-less hop window of the inner barrel

Predator Bucking for SSG24

1 2 3 Next

Black Friday / -30%