Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24
Mini TDC mod for SSG24

Mini TDC mod for SSG24

Regular price €22.00 EUR
/

18 in stock

Lead time 2-5 days.

 

Single best upgrade for SSG24. Period.

This modification removes the clicky stock hopup arm and replaces it with a thumb screw and hop-up arm combination which gives you infinite adjustment. It comes with two different profile arms - one is flat profile and other one is slight concave. Works great with both stock bucking and r-hop mod.

It's not going anywhere

The screw is held in place by friction from the undersized hole and o-rings that press against outer barrel. Trust me - it's not moving by itself.

Easy to install

This mod takes 15 minutes to install and required drilling a hole in outer barrel. It comes with drilling jigs, to help you make a precise hole with either handheld drill or drill press.

What this is not for?

This is not meant to be used with Full Thrust (atleast we have not tested it). It's different from Full Thrust TDC, so you won't be able to use the thumbscrew on the FT arm. 

This is not compatible with the default hopup arms. We found that for stock bucking it makes no apparent difference between the different arms we used. For R-Hop users we feel like the arms do make a difference and therefore our arms are made after what users have been saying work the best for r-hop mods.

Compatible with other mods from community

The hole is in the same position as Snipetors TDC/CDC mods, so you will be able to switch between the two without needing to drill new holes. The only difference is that we have have a 3.5mm hole (we use M3 screw) but Snipetor's have hole for M4 screw.

 

Required for installation:

  • drill or drill-press
  • 3.5mm drill bit
  • courage to drill a hole in outer barrel

What's included:

  • 1x M3 thumbscrew with orings
  • 1x M3 grubscrew
  • 2x hop-up arm / TDC combination inserts (flat & concave)
  • 1x set of jigs for drilling hole

All orders are shipped from Latvia via tracked mail. Delivery time is usually 1-3 weeks.  Shipping starts at around 6.00€ internationally.

All orders are processed within 1-3 working days. You will receive an e-mail with tracking number once the order has been shipped.